Retired - Sequoia Bracelet

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. To begin, please watch our video: How to Use the Baby Jewel Loom. In this video you see how to string the Baby Jewel Loom and start a few rows. If you are unfamiliar with the regular Jewel Loom you can see that full video here.
2. As seen in the video, string your loom so that you have 16 warp threads. There are 15 columns to this pattern.
3. Begin the loom by threading a needle with about 6 feet of thread. Pick up 15 green beads for your first row. Thread them onto the loom as seen in the video. Then continue by following the pattern.
4. Once you complete the pattern, please watch our video: How to Finish Off Traditional Loom Work and Add a Slider Clasp. Tie off and weave in your threads. Cut off the piece from the loom and tie off the cords as seen in the video. Add a dab of Hypo Cement to the knots. Trim any excess cord. Add a dab of glue into the well of the slider clasp and slide the loom piece into the clasp. With your chain nose pliers bend the end cap to cover the slider. Move to the other side of the loom and repeat this process.
5. Take the length of chain and measure 2.25 inches. Take your pliers and open the link same as you would a jump ring. Make two even lengths of chain in this same manner.
6. Open one jump ring and attach it to one length of chain and to one loop of the slide end. Close the jump ring. Move to the other end of this chain and attach another jump ring. Repeat this step to attach the second length of chain to the other side. On to the end of this length attach a lobster clasp with the final jump ring.

• JK-0067 - Exclusive Beadaholique Designer Palette, Miyuki Seed Bead Mix, Round 11/0, 25.5 Grams, Sequoia
  Project uses 1 piece. You will need 1 package.


• FCR-08011 - Nunn Design Ribbon Cord Ends, Barrel 24mm, 2 Pieces, Bright Silver
  Project uses 2 pieces. You will need 1 package.


• XCR-8907 - NYMO Nylon Beading Thread Size D for Delica Beads Ever Green 64YD (58 Meters)
  Project uses 1 Spool. You will need 1 package.


• FCL-7527 - Nunn Design Silver Plated Lobster Clasps 15mm (2)
  Project uses 1 piece. You will need 1 package.


• FJR-2071 - Nunn Design Silver Plated Open Jump Rings Etched 6.5mm 17 Gauge (10)
  Project uses 4 pieces. You will need 1 package.


• CHA-9800 - Nunn Design Silver Plated Textured Cable Chain 9mm By The Ft
  Project uses 4.5 Inches. You will need 1 package.


• XTL-1001 - G S Hypo Cement Precise Applicator Essential!
  Project uses 1 piece. You will need 1 package.

• XTL-6139 - Beadalon Baby Jewel Loom By Julianna C. Avelar, Compact and Portable
• XTL-3030 - Beadalon, Jewel Loom Needles 3.125 / 8cm Long, 6 Pieces
• XTL-5700 - Fiskars 5 Precision Tip Scissors - Super Sharp
• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
• XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers