Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
By following the instructions below, you will make one earring. Repeat all instructions to make the second earring.
- Begin by using flush cutters to cut 5 inches of 22 gauge hematite craft wire.
- On one end of the wire, make a wrapped wire loop, sliding on one copper mini heart before coiling the loop closed. Double the thickness of your coil against the bead's oversized hole by using the technique shown in this video.
- Slide on one faceted rectangle bead, then make another wrapped wire loop with a double-thick coil the same way you did in step 2.
- Use pliers to attach an earring hook onto your wrapped wire loop from the previous step.
- Enjoy your earrings!
WHAT YOU'LL NEED: (scroll down for purchase options)
- PND-409 - Flat Tag Pendant, Mini Heart 11mm, Antiqued Copper, 1 Piece, by Nunn Design
Project uses 2 pieces. You will need 2 packages.
- BMB-106 - Metal Bead, Faceted Rectangle 9x13mm, Antiqued Silver, 1 Piece, by Nunn Design
Project uses 2 pieces. You will need 2 packages.
- FEA-129 - Ear Wire, V-Style 33mm, Antiqued Copper, 1 Pair, by Nunn Design
Project uses 2 pieces. You will need 1 package.
- WNT-2236 - Wire Elements, Tarnish Resistant Hematite Wire, 22 Gauge 20 Yards (18.2 Meters)
Project uses 10 inches. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece
- XTL-0020 - Baby Wubbers Quality Fine Chain Nose Jeweller's Pliers
- XTL-0034 - Wubbers Classic Series Round Nose Quality Jeweller's Pliers
- XTL-9920 - Beadaholique Bead Mat, 12.5x9.25 Inches, 1 Piece