Retired - Copper Garden Necklace

PROJECT N7057
Designer: Rachel Zaimont
Skill Level: Intermediate
A Crystal Clay pendant textured with a floral pattern is surrounded by artisan copper beads in this mixed metal necklace featuring Nunn Design components.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

These instructions will make a 24 inch necklace. For a longer necklace, you will need to buy an additional foot of ball chain. For a shorter necklace, simply cut the ball chain to your desired length.
  1. First, please watch our video on how to use Crystal Clay. Put on the disposable gloves that come with your Crystal Clay.
  2. Next, watch our video on how to make a textured Crystal Clay pendant using the JudiKins Clay Squisher. In this video you will see how to mix and shape the Crystal Clay in the bezel, how to coat the texturing pad with mica powder, and how to press the clay into the texture so it takes the pattern and fills out the bezel.
  3. When your pendant is done, let the clay cure for 14 to 16 hours or overnight.
  4. Take your length of ball chain and string 1 faceted copper drop bead (narrow end first), 2 faceted copper round beads, the loop of your Crystal Clay pendant, 2 faceted copper round beads, and 1 faceted copper drop bead (wide end first). Slide the beads to the center of the ball chain.
  5. Using pliers, attach 1 Nunn Design ball chain connector to the last ball on one side of the necklace, and clamp it shut. Repeat this step for the other side of the necklace.
  6. Open an oval jump ring. Slide it through the loop of the ball chain connector on one side of the necklace, and also slide on the loop of your clasp. Close the jump ring.
  7. Open another oval jump ring. Slide it through the loop of the ball chain connector on the other side of the necklace. Close the jump ring.
  8. Enjoy your necklace!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • PND-6571 - Nunn Design Antiqued Gold Plated Pewter Large Bezel Circle Pendant 19mm
    Project uses 1 piece. You will need 1 package.

  • TRC-256 - Crystal Clay 2-Part Epoxy Clay Kit - Spice (25 Grams)
    Project uses 1 piece. You will need 1 package.

  • XTL-1160 - Crystal Clay Sparkle Dust - Mica Powder 'Antique Copper' 1.5g
    Project uses 1 piece. You will need 1 package.

  • BMB-9082 - Nunn Design Antiqued Copper Plated Faceted Round Bead 3.4x4mm (4)
    Project uses 4 pieces. You will need 1 package.

  • BMB-9070 - Nunn Design Antiqued Copper Plated Faceted Drop Bead 5.5x12mm (2)
    Project uses 2 pieces. You will need 1 package.

  • CHA-0140 - Nunn Design Bulk Chain, Smooth Ball 1.5mm, 1 Foot, Antiqued Gold
    Project uses 2 feet. You will need 2 packages.

  • FCR-1101 - Nunn Design 24kt Gold Plated Ball Chain Connector For 1.8mm & 2.4mm Ball Chain (10)
    Project uses 2 pieces. You will need 1 package.

  • FJR-3921 - 22K Gold Plated Open Jump Rings Oval 21 Gauge 3x4mm (50)
    Project uses 2 pieces. You will need 1 package.

  • FCL-7521 - Nunn Design Antiqued 24kt Gold Plated Lobster Clasps 12mm (2)
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • CSQ-1000 - Judikins Clay Squisher, Texturing Plate Japan Theme 6 Styles, 1 Sheet
  • XTL-880 - ICE Resin, Angled Brushes for ICED Enamels & Paper Sealant, 6 Pack
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
Additional Information
Theme Boho, Autumn
Ingredients PND-6571, TRC-256, BMB-9082, FCR-1101, FJR-3921, FCL-7521,
Useful Techniques & Learning Guides

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Nunn Design Antiqued Gold Plated Pewter Large Bezel Circle Pendant 19mm
You will need 1 package(s).
1 package = 1 Piece.
$4.79 / Package | SKU: PND-6571
You will need 1 package(s).
1 package = .
/ Package | SKU: TRC-256
Nunn Design Antiqued Copper Plated Faceted Round Bead 3.4x4mm (4 Pieces)
You will need 1 package(s).
1 package = 4 Pieces.
$3.49 / Package | SKU: BMB-9082
Nunn Design Ball Chain Connectors, For 1.8mm & 2.4mm Ball Chain, 24K Gold Plated (10 Pieces)
You will need 1 package(s).
1 package = 10 Pieces.
$3.89 / Package | SKU: FCR-1101
22K Gold Plated Open Jump Rings Oval 21 Gauge 3x4mm (50 pcs)
You will need 1 package(s).
1 package = 50 Pieces.
$3.37 / Package | SKU: FJR-3921
Nunn Design Lobster Clasps, Curve 12mm, 24K Antiqued Gold Plated (2 Pieces)
You will need 1 package(s).
1 package = 2 Pieces.
$2.59 / Package | SKU: FCL-7521
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
The Beadsmith Jewelry Fine Round Nose Micro Pliers
$6.49 / Package | SKU: XTL-5514

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed