Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
This necklace measures 16 inches. For a longer or shorter necklace, you can purchase a finished chain necklace of a different length.
- If you are new to metal punching, please watch our video: Show and Tell: Impressart Stamping Blanks and Metal Punches. Using what you have learned in the video, place your silver Impressart Soft Strike stamping blank onto your bench block.
- Using a hammer, take your heart metal punch and create your impression in the center of the stamping blank as shown in the video.
- To define your impression, apply a small amount of Impressart stamp enamel to your stamping as shown in the video.
- Now use flush cutters to cut 3 inches of 24 gauge silver wire, and create a wrapped wire loop, sliding on both your Vintaj brass stamping blank and your heart-stamped blank before closing the wrap (see photo for reference).
- String one 4mm Austrian crystal pearl onto your wire and make another wrapped wire loop, latching the loop onto your chain before closing the wrap. Enjoy your necklace!
WHAT YOU'LL NEED: (scroll down for purchase options)
- PND-9130 - ImpressArt Soft Strike Stamping Blanks, 11.5mm Circular Charm with 2mm Border, 1 Piece, Pewter
Project uses 1 piece. You will need 1 package.
- PND-0230 - Vintaj Vogue Stamping Blanks, Round 16mm, 4 Pieces, Brass
Project uses 1 piece. You will need 1 package.
- SWP-4001 - Austrian Crystal, 5810 Round Faux Pearl Beads 4mm, 50 Pieces, White
Project uses 1 piece. You will need 1 package.
- AXC-98911 - Silver Plated 1mm Snake Chain Necklace With Clasp - 16 Inches
Project uses 1 piece. You will need 1 package.
- WCR-2430 - Artistic Wire, Silver Plated Craft Wire 24 Gauge Thick, 10 Yard Spool, Tarnish Resistant Silver
Project uses 3 inches. You will need 1 package.
- XTL-6235 - ImpressArt Stamp Enamel, Darkens Stamped Impressions, 1.1 Ounce Bottle
Project uses 1 piece. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
- XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
- XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
- XTL-0932 - Scroll Heart Punch For Stamping Metal 1/4 Inch 6mm (1)
- XTL-0250 - Eurotool Bench Block Helper - Rubber Base With Interchangeable Steel And Nylon Blocks
- XTL-0277 - ImpressArt Brass Hammer For Metal Stamping - 1 Pound - 1 Piece