Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
You can choose to make a green tree for this design or a sparkly crystal AB one!
- Add the Iridescent Dreamy Blue pearl to an eye pin, followed by the 12mm Margarita bead, 10mm Margarita bead, 8mm Margarita bead, 6mm Margarita bead, and the White Opal Shimmer bicone. Make a wrapped loop at the top of the beads.
- Add the Elliptic Cut pendant to the bottom of the eye pin using a jump ring.
- Add the crystal tree dangle to the center link of a 16-inch chain using a jump ring.
- Add three White Opal Shimmer bicones to an eye pin. Make a simple loop at the end of the beads. Repeat for a total of two links.
- On one side of the necklace, count up 8 oval chain links from the focal. Cut the small infinity link after the 8th oval link. Attach the bicone link to the 8th link. Attach the excess length of chain you cut away to the other end of the bicone link. Repeat this step on the other side of the necklace.
- Attach a clasp to one end of the necklace using a jump ring. Attach just a jump ring to the other end of the necklace for the clasp to attach to.
WHAT YOU'LL NEED: (scroll down for purchase options)
- FCL-4715 - Lobster Clasps, Curved 12mm, Silver Plated (6 Pieces)
Project uses 1 piece(s). You will need 1 package(s).
- FHP-6267 - Open Eye Pins, 2 Inches Long and 22 Gauge Thick, Silver Plated (50 Pieces)
Project uses 3 piece(s). You will need 1 package(s).
- CHA-0431 - Silver Plated Figaro Chain, 5mm, by the Foot
Project uses 2 feet. You will need 2 package(s).
- PRES-3700-CAB10 - PRESTIGE Crystal, #3700 Margarita Flower Bead 10mm, Crystal AB (1 Piece)
Project uses 1 piece(s). You will need 1 package(s).
- PRES-3700-CAB12 - PRESTIGE Crystal, #3700 Margarita Flower Bead 12mm, Crystal AB (1 Piece)
Project uses 1 piece(s). You will need 1 package(s).
- PRES-3700-CAB6 - PRESTIGE Crystal, #3700 Margarita Flower Bead 6mm, Crystal AB (1 Piece)
Project uses 1 piece(s). You will need 1 package(s).
- PRES-3700-CAB8 - PRESTIGE Crystal, #3700 Margarita Flower Bead 8mm, Crystal AB (1 Piece)
Project uses 1 piece(s). You will need 1 package(s).
- PRES-5328-WOPS4 - PRESTIGE Crystal, #5328 Bicone Bead 4mm, White Opal Shimmer (1 Piece)
Project uses 7 piece(s). You will need 7 package(s).
- PRES-5810-IRDB5 - PRESTIGE Crystal, #5810 Round Pearl Bead 5mm, Iridescent Dreamy Blue (1 Piece)
Project uses 1 piece(s). You will need 1 package(s).
- PRES-6438-AQUA9 - PRESTIGE Crystal, #6438 Elliptic Cut Pendant 9mm, Aquamarine (1 Piece)
Project uses 1 piece(s). You will need 1 package(s).
- FJR-9119 - TierraCast Pewter, Medium Open Jump Rings 7.4mm, 25 Pieces, Silver Plated (25 Pieces)
Project uses 4 piece(s). You will need 1 package(s).
RECOMMENDED TOOLS:
- XTL-0021 - Baby Wubbers Quality Fine Round Nose Jeweller's Pliers
- XTL-5450 - Xuron Jeweler's Super Fine Pliers Chain Nose Flat Nose
- XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire (1 Piece)
- XTL-0020 - Baby Wubbers Quality Fine Chain Nose Jeweller's Pliers