Retired - Emerald Tidepool Necklace

Name: Retired - Emerald Tidepool Necklace
Brand: Beadaholique
SKU: N2120
Availability: OutOfStock

PROJECT N2120

Designer: Kat Silvia

Skill Level: Intermediate

Save to Wishlist

Printer Friendly PDF
(if available)

An organic Vintaj pewter bezel pendant is the perfect backdrop for a emerald artisan piece.

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

These instructions will give you a necklace that is 16 inches in length. To adjust the size simply modify the length of chain respectively. It is also recommend that you use protective gloves and a face mask while working with resin. You will also need a toothpick and heat source such as a cigarette lighter.

To begin, mix together the two part Ice Resin in a cup.
Slowly add a tiny drop of the transparent dye. Build the color to your desired color. Mix until completely mixed.
Carefully drip the resin into the bezel piece. Use a toothpick to help the resin get into the bezel and touch all the sides.
After a few minutes use a heat source to bring any bubbles to the surface and out of the resin. Allow this piece to cure for at least 1-3 days.
While your resin is curing you can prepare the rest of the necklace. Cut off 16 inches of bar chain. To one end attach one jump ring. Close the jump ring. Move to the other side of the chain open another jump ring and attach it to the final bar of the chain and attach one lobster clasp. Close the jump ring.
Open one jump ring and attach it to the largest ring on the connector link, and around the center of the chain. Close the jump ring.
Once your resin piece has dried, open another jump ring and attach the pendant to the bottom loop of the connector link. Close the jump ring.
All done!

WHAT YOU'LL NEED: (scroll down for purchase options)

FCO-5273 - Vintaj Artisan Pewter Dual Ring Connector Link 9.5x21.5mm (1)
Project uses 1 piece. You will need 1 package.

PND-10138 - Vintaj Artisan Pewter, Rectangular Bezel Pendant 36.5x9mm, 1 Piece
Project uses 1 piece. You will need 1 package.

CHA-08023 - Silver Plated Chain, Bar Links 8.5mm, 1 Foot, Bright Silver
Project uses 16 Inches. You will need 2 packages.

FJR-1105 - Silver Plated Open Jump Rings Bright Oval 5x4mm (50)
Project uses 4 pieces. You will need 1 package.

FCL-2507 - Silver Plated Curved Lobster Clasps 10mm (10)
Project uses 1 piece. You will need 1 package.

TRC-12 - Ice Resin Epoxy, Jewelers Grade Clear Casting Kit, 1 Ounce
Project uses 1 piece. You will need 1 package.

TRC-89 - CASTIN CRAFT Casting Epoxy Resin Transparent Green Pigment Dye 1 Oz
Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:

TRC-603 - ICE Resin, Mixing Cups & White Stir Sticks, 5 Pack
XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex

Additional Information

Theme	St. Patrick's Day
Ingredients	PND-10138, CHA-08023, FCL-2507, TRC-89,

Useful Techniques & Learning Guides

How to Open and Close a Jump Ring
Mixed Media 101: Creating Mixed Media Jewelry

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.

Vintaj Artisan Pewter, Rectangular Bezel Pendant 36.5x9mm (1 Piece)

            Vintaj Artisan Pewter, Rectangular Bezel Pendant 36.5x9mm (1 Piece)
        
You will need 1 package(s).
1 package = 1 Piece.

                $3.39
            
             / Package | SKU: PND-10138

            
You will need 2 package(s).
1 package = .

             / Package | SKU: CHA-08023

Lobster Clasps, Curved 10mm, Silver Plated (10 Pieces)

            Lobster Clasps, Curved 10mm, Silver Plated (10 Pieces)
        
You will need 1 package(s).
1 package = 10 Pieces.

                $7.09
            
             / Package | SKU: FCL-2507

Sold out

CASTIN CRAFT Casting Epoxy Resin Transparent Green Pigment Dye 1 Oz

            CASTIN CRAFT Casting Epoxy Resin Transparent Green Pigment Dye 1 Oz
        
You will need 1 package(s).
1 package = 1 oz..

                $7.49
            
             / Package | SKU: TRC-89