Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
Feel free to add more crystals to your chain for extra sparkle!
- Begin by cutting 1.5" of chain.
- Open a jump ring and link it to the Majestic Pendant and one end of the chain. It is a snug fit to keep the delicate feel of these earrings. Wiggle your jump ring until it goes into the pendant and then pull it so the opening is up top. Slip on an end chain link from your cut piece of chain. Close the jump ring.
- Open another jump ring and link it to the other end of the chain as well as the loop at the base of the earring hook. Close the jump ring.
- Please watch the video: How to Attach Wire Loops to Chain. Place a bicone onto a head pin, create a wrapped wire loop and attach it to the chain 5 chain links above the pendant (see video on how to do this). Count 5 more chain links from the spot where you just attached your bicone and attach a second bicone with a wrapped wire loop. Now count 5 more chain links from the last attached bicone and connect a third one with a wrapped wire loop.
- Make your second earring following the same steps as the first one. Enjoy!
WHAT YOU'LL NEED: (scroll down for purchase options)
- FJR-8011 - Silver-Filled Open Jump Rings 4mm 22 Gauge (20 Pieces)
Project uses 4 piece(s). You will need 1 package(s).
- CHA-0500 - Silver Plated Rolo Chain, 2mm, by the Foot
Project uses 3 inches. You will need 1 package(s).
- FEA-1220 - Earring Findings, Ear Wire 21mm Long 20 Gauge Thick Sterling Silver (2 Pairs)
Project uses 1 pair. You will need 1 package(s).
- PRES-6436-BLZR9 - PRESTIGE Crystal, #6436 Majestic Pendant 9mm, Blue Zircon (1 Piece)
Project uses 2 piece(s). You will need 2 package(s).
- FHP-5415 - Head Pins, 1.5 Inches Long and 24 Gauge Thick, Silver Plated (50 Pieces)
Project uses 6 piece(s). You will need 1 package(s).
RECOMMENDED TOOLS:
- XTL-5032 - The Beadsmith Wire Looping Pliers - Concave And Round Nose
- XTL-5450 - Xuron Jeweler's Super Fine Pliers Chain Nose Flat Nose
- XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire (1 Piece)
- XTL-0020 - Baby Wubbers Quality Fine Chain Nose Jeweller's Pliers