Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available,
may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND
OTHER SUPPLIES sections for current availability.
By following the instructions below you will make one earring. Repeat all instructions to make the second earring. You will also need a toothpick or scrap of wire for this project.
- Please watch our video: How to Use Vintaj Patinas and Glazes. From what you learned in the video, pour out a little bit of the patina on to a piece of paper or wax paper. Use your paint brush to paint the front of the filigree piece. You may need to dab the paint into the small portions to give it a good coat. Allow to dry before flipping it over to paint the back side. Set aside to dry.
- Once dry, place a dab of E6000 on to the center of the piece of filigree and place an Austrian crystal flatback into the center. (See photo for reference)
- Take one eye pin, open the loop, same as you would a jump ring. Attach one tassel and close the loop. String on one pom to the eye pin, then string on one gold filigree bead. Make a simple wire loop. Repeat this step twice to complete three tassel dangles.
- Open the loop of the eye pins and attach them to the painted filigree piece. One in the center, one in the center on the left and one in the center on the right. (See photo for reference)
- Open the loop of the earring hook and attach it to the top of the filigree piece and you're all done!
WHAT YOU'LL NEED: (scroll down for purchase options)
- POM-0004 - Pom Pom Embellishments, Round Large 25mm, 10 Grams, Assorted Colors
Project uses 6 pieces. You will need 1 package.
- FHP-6220 - 22K Gold Plated Open Eye Pins 21 Gauge 2 Inches (x50)
Project uses 6 pieces. You will need 1 package.
- SWF-420567 - Austrian Crystal, Round Flatback Rhinestone SS20 4.6mm, 50 Pieces, Crystal Rainbow Dark
Project uses 2 pieces. You will need 1 package.
- FEA-3010 - 22K Gold Plated Surgical Steel Hypo-Allergenic Earring Hooks (100)
Project uses 2 pieces. You will need 1 package.
- PTS-101 - Nylon Cord Pendant, Tassel with Gold Tone Open Jump Ring 30mm, 10 Pieces, Neon Pink
Project uses 6 pieces. You will need 1 package.
- PND-5729 - Antiqued Silver Plated Ornate Fan Drop Filigree Stamping 34mm (1)
Project uses 2 pieces. You will need 2 packages.
- XTL-9085 - Vintaj Patina, Opaque Permanent Ink For Metal, 0.5 Ounce Bottle, Deep Turquoise
Project uses 1 piece. You will need 1 package.
- BMB-5153 - 22K Gold Plated Delicate Filigree 8mm Round Beads (10)
Project uses 6 pieces. You will need 1 package.
- XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
Project uses 1 piece. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
- XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
- XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
- XTL-880 - ICE Resin, Angled Paint Brushes for ICED Enamels & Paper Sealant, 6 Pack