Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
These instructions will make a 24 inch necklace. To adjust the size, choose your desired length of chain. For a longer necklace, you will need to purchase more chain. If you wish to use a clasp, we recommend a lobster clasp and jump ring.
- Begin by using flush cutters to cut 24 inches of chain.
- Use pliers to open an 8mm jump ring. Slide on the two end links of your chain. Close the jump ring.
- Open a second jump ring and slide on your hammered circle. Also slide on your jump ring from step 2. Close the jump ring.
- Now open a third jump ring and slide on the hole of your fern charm. Also slide on your hammered circle. Close the jump ring.
- Onto a head pin, slide one 4mm gemstone bead. Make a wrapped wire loop above the bead, latching it onto your hammered circle before closing the loop. Repeat this step nine more times for a total of 10 gemstone beads, with 5 beads hanging on either side of the jump ring attaching your fern charm (see photo for reference).
- Enjoy your necklace!
WHAT YOU'LL NEED: (scroll down for purchase options)
- PND-054 - Charm, Organic Oval with Fern Design 31.5mm, Antiqued Silver, 1 Piece, by Nunn Design
Project uses 1 piece. You will need 1 package.
- PND-070 - Open Frame Pendant, Flat Round Hoop 15.5mm, Antiqued Silver, 1 Piece, by Nunn Design
Project uses 1 piece. You will need 1 package.
- SPAG-08002 - Gemstone Beads, Green Moss Agate, Round 4mm, 15.5 Inch Strand
Project uses 10 beads. You will need 1 package.
- CHA-9809 - Nunn Design Antiqued Nunn Design Silver Plated Chain Flat Cable By The Foot
Project uses 2 feet. You will need 2 packages.
- FJR-3046 - Nunn Design Jump Ring, Twisted Rope Open 17 Gauge, 8mm, 10 Pieces, Antiqued Silver
Project uses 3 pieces. You will need 1 package.
- FHP-5415 - Silver Plated Head Pins 1.5 Inches 24 Gauge (X50)
Project uses 10 pieces. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece
- XTL-0034 - Wubbers Classic Series Round Nose Quality Jeweller's Pliers
- XTL-0020 - Baby Wubbers Quality Fine Chain Nose Jeweller's Pliers