Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
You will also need gloves and toothpicks for this design.
- Begin by mixing your resin. Mix equal parts of A and B. If you have not worked with resin before you may find this video helpful: How to Use Nunn Design Resin.
- Then watch our video: Tips for Working with Resin and Open Back Bezels. In this video you will see how to prep your open back bezels and how to add pigment to the resin for this design.
- Once you have your open back piece for this design, set it aside to cure for at least 24 hours.
- Once fully cured, then carefully peel the tape off of the back.
- Open one jump ring and attach the open back pendant to the inner loop on the right side of the bangle. Then open another jump ring and attach one succulent charm to the inner loop on the left side of the bangle.
- Take one headpin and string on one Czech glass bead. Make a simple wire loop. Set aside and repeat twice more.
- Open one last jump ring and attach all three Czech glass beads to the outer loop of the left side of the bangle.
WHAT YOU'LL NEED: (scroll down for purchase options)
- TRC-14 - Nunn Design 2-Part Epoxy Resin Kit, Jewelers Grade Clear, 8 Oz Kit
Project uses 1 piece. You will need 1 package.
- TRC-83 - CASTIN CRAFT Casting Epoxy Resin Opaque Green Pigment Dye 1 Oz
Project uses 1 piece. You will need 1 package.
- TRC-87 - CASTIN CRAFT Casting Epoxy Resin Opaque White Pigment Dye 1 Oz
Project uses 1 piece. You will need 1 package.
- PNT-317 - Open Back Bezel Pendant, Split Circle Crescent 16.5x13mm, 1 Piece, Antiqued Silver, by Nunn Design
Project uses 1 piece. You will need 1 package.
- FJR-01009 - Jump Rings, Open Textured Oval 6x4.5mm, 10 Pieces, Antiqued Silver, by Nunn Design
Project uses 3 pieces. You will need 1 package.
- PND-399 - Metal Charm, Succulent 12x15mm, Antiqued Silver, 1 Piece, by Nunn Design
Project uses 1 piece. You will need 1 package.
- JB-2800 - Nunn Design Expandable Charm Bangle Bracelet, Double Bar, 1 Bracelet, Antiqued Silver
Project uses 1 piece. You will need 1 package.
- FHP-1262 - Nunn Design Head Pin, with Ball Head 2 Inches Long and 20 Gauge Thick, 10 Pieces, Antiqued Silver
Project uses 3 pieces. You will need 1 package.
- BCP-10357 - Czech Fire Polished Glass Beads 6mm Round Lumi Coated - Green (25)
Project uses 3 pieces. You will need 1 package.
RECOMMENDED TOOLS:- XTL-0020 - Baby Wubbers Quality Fine Chain Nose Jeweller's Pliers
- XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire (1 Piece)
- XTL-0023 - Baby Wubbers Quality Fine Bent Chain Nose Jeweller's Pliers
- XTL-0021 - Baby Wubbers Quality Fine Round Nose Jeweller's Pliers