Retired - Wine Drops Necklace

Name: Retired - Wine Drops Necklace
Brand: Beadaholique
SKU: N3008
Availability: OutOfStock

PROJECT N3008

Designer: Karlin Jones

Skill Level: Beginner

Save to Wishlist

Printer Friendly PDF
(if available)

This elegant necklace incorporates 2 colors of gorgeous wine-colored briolette beads strung on sleek

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

These instructions will make a finished necklace approximately 17" long. Be sure to include at least 6 additional inches of wire to allow for crimping, two or three inches for each side.

Measure 24 inches of your wire and cut using your flush cutters.
Next, string on your clasp then loop the beading wire back through the crimp bead (you want a short tail of about 3 inches of beading wire). Pull snug so that you have a small loop.
Using your crimp pliers, crimp your crimp bead. Snip off any excess beading wire from the short tail using your flush cutter.
String on one large briolette bead followed by a smaller one. Repeat this sequence 8 times, ending with one large briolette bead.
Once you've strung all your beads, take the end of your wire and string it through another crimp bead. Add a jump ring and loop the wire back into the crimp bead.
Using your crimp pliers, crimp your crimp bead. Snip off any excess beading wire.
Your necklace is now ready!

WHAT YOU'LL NEED: (scroll down for purchase options)

XCR-69543 - Beadalon Wire Satin Gold 19 Strand .015 Inch / 30Ft
Project uses 24 inches. You will need 1 package.

BCP-11015 - Glass Faceted Teardrop Briolette Beads 12x8mm - Wine Red (4)
Project uses 8 pieces. You will need 2 packages.

BCP-11005 - Glass Faceted Teardrop Briolette Beads 9x6mm - Wine Red (4)
Project uses 8 pieces. You will need 2 packages.

FCR-1206 - Beadalon Gold Plated Crimp Tubes 1.5mm (65 Beads)
Project uses 2 pieces. You will need 1 package.

FCL-1571 - 22K Gold Plated Spring Ring Clasps 7mm (25)
Project uses 1 piece. You will need 1 package.

FJR-4016 - 22K Gold Plated Closed Jump Rings 5mm 21 Gauge (20)
Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:

XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
XTL-5265 - Mighty Crimping Pliers Large Crimpers For 3mm Crimps

Additional Information

Theme	Special Occasion, Autumn
Ingredients	XCR-69543, FCR-1206,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.

            Beadalon Wire "Satin Gold" 19 Strand .015 Inch / 30Ft
        
You will need 1 package(s).
1 package = 1 Spool.

                $13.99
            
             / Package | SKU: XCR-69543

Beadalon Crimp Beads, Tube 1.5mm, Gold Plated (65 Pieces)

            Beadalon Crimp Beads, Tube 1.5mm, Gold Plated (65 Pieces)
        
You will need 1 package(s).
1 package = 65 Pieces.

                $3.59
            
             / Package | SKU: FCR-1206