Retired - Buttoned Up Bracelet

PROJECT B1079
Designer: Megan Milliken
Skill Level: Beginner
Here's a new way to wear those gorgeous Austrian crystal buttons: make them into a lovely bracelet! This bracelet is classy and cute, and would go with any look.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

Finished bracelet size: approximately 7 inches.
  1. Before you begin, you'll need to trim down your triangle jump rings slightly. Use a pair of flush cutters to trim just about a millimeter from each side of the triangle jump rings where they open. This will allow the triangle jump rings to close more tightly around the buttons. Be sure to wear eye protection when you do this, as the tiny ends tend to fly around when you snip them.
  2. Place a sterling silver triangle jump ring into each hole of your eight crystal buttons, closing them down all the way.
  3. Then use a sterling silver oval jump ring to connect each triangle jump ring to the next, with the buttons going from lightest to darkest color.
  4. Use an oval jump ring on each end to attach the sides of a sterling silver 9mm toggle clasp.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • SWBB-5884 - Austrian Crystal, 3014 Faceted Round Sew-On Stone Buttons 12mm, 2 Pieces, Crystal Foiled
    Project uses 2 pieces. You will need 1 package.

  • SWBB-5885 - Austrian Crystal Sew-On Stones, 3014 Faceted Round Button, 12mm, 2 Pieces, Crystal Satin F
    Project uses 2 pieces. You will need 1 package.

  • SWBB-5886 - Austrian Crystal Sew-On Stones, 3014 Faceted Round Button, 12mm, 2 Pieces, Jet Unfoiled
    Project uses 2 pieces. You will need 1 package.

  • SWBB-5887 - Austrian Crystal Sew-On Stones, 3014 Faceted Round Button, 12mm, 2 Pieces, Jet Hematite
    Project uses 2 pieces. You will need 1 package.

  • FCO-4100 - Sterling Silver Small Triangle Jump Rings -Hang Drops Bails (10 Pieces)
    Project uses 16 pieces. You will need 2 packages.

  • FJR-03964 - Sterling Silver Open Jump Rings Oval 4x6mm 20 Gauge (20)
    Project uses 9 pieces. You will need 1 package.

  • FCL-03002 - Sterling Silver Toggle Clasp 9mm (1 Set)
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
Additional Information
Theme Special Occasion
Ingredients FCO-4100, FJR-03964, FCL-03002,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Sterling Silver Small Triangle Jump Rings -Hang Drops Bails (10 Pieces)
You will need 2 package(s).
1 package = 10 Pieces.
$6.99 / Package | SKU: FCO-4100
Sterling Silver Open Jump Rings Oval 4x6mm 20 Gauge (20 pcs)
You will need 1 package(s).
1 package = 20 Pieces.
$7.47 / Package | SKU: FJR-03964
Sterling Silver Toggle Clasp 9mm (1 Set)
You will need 1 package(s).
1 package = 1 Set.
$7.29 / Package | SKU: FCL-03002
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed