Retired - Powder Rose Bracelet

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. To view helpful tips for creating this design, please watch the video Quick Tip: Using Bead Bumpers with Beading Chain
2. Begin by using flush cutters to cut four 6 inch lengths of 0.7mm sleek beading chain.
3. Onto one length of chain, string the following: one bead bumper, one pink pearl, and one bead bumper. Then string on one bead bumper, one white pearl, and one bead bumper. Separate your two pearls 0.5 inches apart using the bead bumpers, as shown in the video. Continue this pattern and spacing four more times, then add one more pink pearl with a bead bumper on either side. Repeat this step exactly on your second length of chain.
4. Follow the above pattern on your third and fourth lengths of chain, this time spacing your alternating pink and white pearls one inch apart for a total of five pearls.
5. Slide the ends of two of your chains into a crimp cord end, and crimp the bead. Repeat this step on the opposite side of your chains. Do this for both ends of your other two chain lengths as well.
6. To attach your clasp: Use pliers to open a 4mm jump ring and slide on two of your crimp cord end loops. Also slide on the loop on one side of your magnetic clasp. Close the jump ring. Repeat this step to attach the other half of your clasp on the opposite side of your bracelet. Enjoy!

• BMP-0108 - Beadalon Bead Bumpers, Oval Silicone Spacers 2mm, 50 Pieces, Silver
  Project uses 68 pieces. You will need 2 packages.


• CHA-1620 - Silver Plated Fine Beading Chain, .7mm, by the Foot
  Project uses 2 feet. You will need 2 packages.


• SWP-4013 - Austrian Crystal, #5810 Round Faux Pearl Beads 4mm, 50 Pieces, Powder Rose
  Project uses 18 beads. You will need 1 package.


• SWP-3001 - Austrian Crystal, #5810 Round Faux Pearl Beads 3mm, 50 Pieces, White
  Project uses 14 beads. You will need 1 package.


• FCR-1320 - Silver Plated Cord Ends / 2 x 3mm Crimp Beads With Loop (100)
  Project uses 4 pieces. You will need 1 package.


• FCL-0732 - Magnetic Clasps, Fluted Barrel Shape 9x5mm, 2 Sets, Silver Plated
  Project uses 1 piece. You will need 1 package.


• FJR-5140 - Silver Plated Open Jump Rings 4mm 21 Gauge Thick (100)
  Project uses 2 pieces. You will need 1 package.

• XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece
• XTL-0020 - Baby Wubbers Quality Fine Chain Nose Jeweller's Pliers
• XTL-5200 - Standard Size Beading Crimping Pliers (For 2x2mm & 2x1mm Crimp Beads)