Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
By following the instructions below you will make one earring. Repeat all instructions to make the second earring.
- On to one headpin, string on one bicone bead, one bead aligner, one large hole pearl, one bead aligner, and one bicone bead. Make a wrapped wire loop.
- Next, take one eye pin and string on one bicone bead. Make a simple wire loop. Open one loop of this piece, same as you would a jump ring, and attach it to the wrapped wire loop of the pearl component. Close the loop.
- Take another eye pin and string on one bicone bead. Make a simple wire loop. Attach this loop to the other side of the eye pin from the previous step.
- Take another eye pin and string on one bicone bead. Make a simple wire loop. Attach this loop to the other side of the eye pin from the previous step.
- Finally, open the loop of the last eye pin and attach it to the loop of the earring post. Close the loop and you're all done!
WHAT YOU'LL NEED: (scroll down for purchase options)
- FEA-1540 - TierraCast Silver Plated Pewter Stud Post Earrings Star Jasmine 13mm (1 Pair)
Project uses 1 Pair. You will need 1 package.
- FEA-1016 - Bullet Clutch Earring Backs, Hypo Allergenic with Pad 7x11mm, 50 Pieces, Silver Tone
Project uses 2 pieces. You will need 1 package.
- SWP-9901 - Austrian Crystal, 5890 BeCharmed Pearls European Style Lg Hole 14x9.5mm, 1 Piece, Bronze
Project uses 2 pieces. You will need 2 packages.
- SWBI-14516 - Austrian Crystal, 5328 Bicone Beads 4mm, 24 Pieces, Light Silk
Project uses 10 pieces. You will need 1 package.
- FHP-5320 - Silver Plated Head Pins 2 Inches Long/22 Gauge (X50)
Project uses 2 pieces. You will need 1 package.
- FHP-6265 - Silver Plated Open Eye Pins 22 Gauge 1 Inch (x50)
Project uses 6 pieces. You will need 1 package.
- BMB-227 - TierraCast White Bronze Plated Lead-Free Pewter Classic Pandora Bead Aligners 7mm (4)
Project uses 4 pieces. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece
- XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
- XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers