Retired - Marguerite Earrings

PROJECT E8097
Designer: Alexandra Smith
Skill Level: Intermediate
Cheery daisy charms are painted with Vintaj Patina and set in resin in these charming bezel earrings.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

In addition to the materials listed, we recommend using a face mask, some disposable gloves. You will also need toothpicks and a heat source such as a lighter or small torch to complete this project. Be sure to cover your work surface when using patina and resin. By following the instructions below, you will make one earring. Repeat all instructions to make the second earring.
  1. To see how to create this project from start to finish, please watch the video: How to Make the Marguerite Earrings using Vintaj Patina and 2-Part Resin.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • PND-5070 - Fine Silver Plated Pewter 2-Side Sunflower Charm 15mm (1)
    Project uses 2 pieces. You will need 2 packages.

  • PND-6977 - Silver Plated Round Bezel Pendant - 18.5mm Diameter (1)
    Project uses 2 pieces. You will need 2 packages.

  • XTL-9068 - Vintaj Patina Opaque Permanent Ink - Yellow Ochre - 0.5 Ounce Bottle
    Project uses 1 bottle. You will need 1 package.

  • XTL-9080 - Vintaj Patina Opaque Permanent Ink - Marble White - 0.5 Ounce Bottle
    Project uses 1 bottle. You will need 1 package.

  • XTL-9069 - Vintaj Patina Opaque Permanent Ink - Purple Opalite - 0.5 Ounce Bottle
    Project uses 1 bottle. You will need 1 package.

  • FEA-8570 - Silver Plated Earring Hooks Ear Wires With Teardrop Detail (5 Pairs)
    Project uses 2 pieces. You will need 1 package.

  • TRC-14 - Nunn Design 2-Part Epoxy Resin Kit, Jewelers Grade Clear, 8 Oz Kit
    Project uses 1 kit. You will need 1 package.

  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-0880 - Paint Brush for ICED Enamels, Patinas & Paper Sealant, 1 Brush
  • XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece
  • XTL-0020 - Baby Wubbers Quality Fine Chain Nose Jeweller's Pliers
Additional Information
Theme Spring, Easter
Ingredients PND-5070, FEA-8570, TRC-14, XTL-1054,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Fine Silver Plated Pewter 2-Side Sunflower Charm 15mm (1 pcs)
You will need 2 package(s).
1 package = 1 Piece.
$1.49 / Package | SKU: PND-5070
Earring Findings, Ear Wire Hooks with Teardrop 18mm, Silver Plated (5 Pairs)
You will need 1 package(s).
1 package = 5 Pairs.
$5.09 / Package | SKU: FEA-8570
Nunn Design 2-Part Epoxy Resin Kit, Jewelers Grade Clear, 8 Oz Kit
You will need 1 package(s).
1 package = 8 oz..
$57.99 / Package | SKU: TRC-14
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
You will need 1 package(s).
1 package = 1 Piece.
$68.69 / Package | SKU: XTL-1054
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Baby Wubbers Quality Fine Chain Nose Jeweller's Pliers
$32.99 / Package | SKU: XTL-0020

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed