Retired - Magical Potion Necklace

Name: Retired - Magical Potion Necklace
Brand: Beadaholique
SKU: N2197
Availability: OutOfStock

PROJECT N2197

Designer: Kat Silvia

Skill Level: Beginner

Save to Wishlist

Printer Friendly PDF
(if available)

Keep your magical potion safely close by with this Nunn Design Isty Bottle Pendant Necklace.

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

This necklace measures approximately 24 inches. To modify the length, simply adjust the length of chain on both sides respectively.

Begin by removing the cork of the bottle and filling the bottle with crystal splash. Shake it down to let them settle and then add the cork. If you would like, you can add a dab of E6000 to permanently seal the cork in the bottle.
Cut the 24 inches of chain into 2 lengths of 12 inches.
Open one jump ring and attach it to one loop of the bottle and to one length of chain. Close the jump ring. Repeat on the other side with the second length of chain.
Move to one end of the chain and attach another jump ring.
Move to the other end of the chain and attach one more jump ring to the end of the chain and to one lobster clasp.

WHAT YOU'LL NEED: (scroll down for purchase options)

PND-3327 - Nunn Design Itsy Bottle, 2 Hole Top Decorative with Cork 39mm, 1 Bottle, Silver Plated
Project uses 1 piece. You will need 1 package.

BDLL-9998 - Beadelle Collection Crystal Splash Assorted Clear Crystal Mix (1 oz)
Project uses 1 piece. You will need 1 package.

CHA-0146 - Nunn Design Bulk Chain, Delicate Cable Links 2.5x2mm, By the Foot, Bright Silver
Project uses 24 Inches. You will need 2 packages.

FJR-5150 - Silver Plated Open Jump Rings 5mm 20 Gauge (x100)
Project uses 4 pieces. You will need 1 package.

FCL-2513 - Beautiful Silver Plated Curved Lobster Clasps 12mm (10)
Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:

XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece
XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers

Additional Information

Theme	Special Occasion, Personalization, Bridal
Ingredients	CHA-0146, FJR-5150, FCL-2513,

Useful Techniques & Learning Guides

How to Open and Close a Jump Ring

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.

            
You will need 2 package(s).
1 package = .

             / Package | SKU: CHA-0146

Silver Plated Open Jump Rings 5mm 20 Gauge (100 pcs)

            Silver Plated Open Jump Rings 5mm 20 Gauge (100 pcs)
        
You will need 1 package(s).
1 package = 100 Pieces.

                $3.39
            
             / Package | SKU: FJR-5150

Lobster Clasps, Curved 12.5mm, Silver Plated (10 Pieces)

            Lobster Clasps, Curved 12.5mm, Silver Plated (10 Pieces)
        
You will need 1 package(s).
1 package = 10 Pieces.

                $8.29
            
             / Package | SKU: FCL-2513