Retired - Joyful Lemon Necklace

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Please watch our video: How To Use Ice Resin. From what you learned in the video, mix your resin and separate the amount you want to color into a cup; about 1 tsp. Slowly add two drops of yellow. If you want a lighter color, you can add a little bit of the white at a time.
2. Make sure your pendant is stable and level using the museum putty. Drip the resin into the bezel slowly. Create a slight dome with the resin. Use a lighter to help get rid of any air bubbles. Allow the resin to cure for at least 24 hours.
3. Take one head pin, string on one pearl and make a simple wire loop. Trim any excess wire. Repeat two more times.
4. The chain used in this project has open links that open like jump rings. Remove two links of the chain and set aside. Adjust the length of the chain to suit your style.
5. Find the center of the chain and using one of the opened links, attach it to the pendant and to the center link.
6. Move over two links of chain and take the second open link and attach the three simple wire loops to this link in the chain.
7. Move to the end of the chain, open the jump ring attached to the lobster clasp and attach it to the end link of the chain.

• PNT-130 - TierraCast Bezel Pendant, Fits #4320 Pear 14x10mm, 1 Piece, Antiqued Brass
  Project uses 1 piece. You will need 1 package.


• SWP-4086 - Austrian Crystal, #5810 Round Faux Pearl Beads 4mm, 50 Pieces, Eden Green
  Project uses 3 pieces. You will need 1 package.


• CHA-99892 - Vintaj Natural Brass Cable Chain, 3mm, by the Foot
  Project uses 18 Inches. You will need 2 packages.


• FHP-6310 - Antiqued Brass Head Pins 1 Inch / 22 Gauge (X50)
  Project uses 3 pieces. You will need 1 package.


• FCL-2607 - Antiqued Brass Sleek Lobster Claw Clasps 10mm (10)
  Project uses 1 piece. You will need 1 package.


• TRC-10 - ICE Resin Jewelers Grade Clear Casting Epoxy Resin 8 oz Kit
  Project uses 1 piece. You will need 1 package.


• TRC-82 - CASTIN CRAFT Casting Epoxy Resin Opaque Yellow Pigment Dye 1 Oz
  Project uses 1 piece. You will need 1 package.


• TRC-87 - CASTIN CRAFT Casting Epoxy Resin Opaque White Pigment Dye 1 Oz
  Project uses 1 piece. You will need 1 package.

• TRC-604 - ICE Resin, Mixing Cups & White Stir Sticks, 20 Pack
• XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece
• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
• XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers