Retired - Geometric Mod Earrings

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Begin by watching our video: How to Use Ice Resin. Then Watch the video: How to Make Colorful Rings with 2-Part Resin and Pigment.
2. From what you learned in the videos, mix part A and B of your resin. Once they are combined, add a few drops of white pigment.
3. Once combined, carefully drip the resin into the circle bezels until the are filled but not domed.
4. Set aside to cure for at least 24-48 hours.
5. By following the instructions below you will make one earring. Repeat all instructions to make the second earring.
6. From the chain, separate three circle links.
7. Open one jump ring and attach one separated chain link to one hole in the triangle. Close the jump ring. Repeat for the other three links.
8. To one link, open another jump ring and attach the circle bezel to the other end of this link. Close the jump ring.
9. For the remaining two links add one jump ring to the ends of the link. Close the jump ring.
10. Open one jump ring, attach this ring to the two you just attached and add one earring finding to this jump ring before closing it. Close the jump ring.
11. All done!

• SWCR-3038 - Austrian Crystal, 3270 Triangle Sew-On Stone 16mm, 1 Piece, Jet Black
  Project uses 2 pieces. You will need 2 packages.


• CHA-0402 - Silver Plated Bulk Chain, 8.5x4mm Bubble Links, Sold By The Foot
  Project uses 6 Inches. You will need 1 package.


• FJR-5150 - Silver Plated Open Jump Rings 5mm 20 Gauge (x100)
  Project uses 14 pieces. You will need 1 package.


• FEA-3005 - Silver Plated Surgical Steel Earring Hooks Hypo-Allergenic (x100)
  Project uses 2 pieces. You will need 1 package.


• PND-08273 - Nunn Design Charm, Itsy Circle Bezel 10.5x14mm, 2 Pieces, Silver
  Project uses 2 pieces. You will need 1 package.


• TRC-10 - ICE Resin Jewelers Grade Clear Casting Epoxy Resin 8 oz Kit
  Project uses 1 piece. You will need 1 package.


• TRC-87 - CASTIN CRAFT Casting Epoxy Resin Opaque White Pigment Dye 1 Oz
  Project uses 1 piece. You will need 1 package.

• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
• XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers