Retired - Black & White Swan Dance Necklace

PROJECT N2255
Designer: Kat Silvia
Skill Level: Advanced
Playing with light and dark, this necklace features an open back Nunn Design bezel with an abstract swirl of white and black resin.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

This necklace measures approximately 18 inches. To modify the length, simply adjust the length of chain on both sides respectively. You will also need some packing tape, gloves and toothpicks for this project. We recommend watching all videos before beginning this project.
  1. Cut off a square of the packing tape and place the open back bezel on to the tape and make sure all edges are secure so no resin leaks out.
  2. Mix your resin according to the instructions on the box. Equal parts of A and B. Transfer a small amount to separate cup. In this cup begin adding the color to achieve the level of black you desire. Add a small amount of mica powder to the resin and mix in. Pour this into the bezel. Also be sure at this stage to mix your white resin in a separate cup and set aside.
  3. Next, please watch our video: How to Achieve a Marbled Effect in Resin. In this video you will see how to do the marbling technique in your resin using the white resin.
  4. Once your resin as fully cured, remove the tape and you are ready to assemble the necklace. Begin by cutting off 18 inches of chain. To one end open one 4mm jump ring and attach it to one end and to one lobster clasp. Close the jump ring.
  5. Open another 4mm jump ring and attach it to the other end of the chain. Close the jump ring.
  6. Open one 6.5mm jump ring and attach it to the pendant and around the center of the chain. Close the jump ring.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • PND-08249 - Nunn Design Open Frame Pendant, Circle 25x30.5mm, 1 Piece, Silver
    Project uses 1 piece. You will need 1 package.

  • CHA-0500 - Silver Plated Rolo Chain, 2mm, by the Foot
    Project uses 18 Inches. You will need 2 packages.

  • FJR-5454 - Silver Plated Open Jump Rings 4mm 22 Gauge (50)
    Project uses 2 pieces. You will need 1 package.

  • FJR-2071 - Nunn Design Silver Plated Open Jump Rings Etched 6.5mm 17 Gauge (10)
    Project uses 1 piece. You will need 1 package.

  • FCL-7523 - Nunn Design Silver Plated Lobster Clasps 12mm (2)
    Project uses 1 piece. You will need 1 package.

  • TRC-86 - CASTIN CRAFT Casting Epoxy Resin Opaque Black Pigment Dye 1 Oz
    Project uses 1 piece. You will need 1 package.

  • TRC-87 - CASTIN CRAFT Casting Epoxy Resin Opaque White Pigment Dye 1 Oz
    Project uses 1 piece. You will need 1 package.

  • TRC-51 - Easy Cast Clear Casting Epoxy Enamel Resin 8 oz
    Project uses 1 piece. You will need 1 package.

  • XTL-1161 - Crystal Clay Sparkle Dust - Mica Powder 'White Pearl' 1.5g
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • TRC-604 - ICE Resin, Mixing Cups & White Stir Sticks, 20 Pack
  • XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
Additional Information
Theme Vintage Look
Ingredients PND-08249, CHA-0500, FJR-5454, FCL-7523, TRC-86, TRC-87, TRC-51, XTL-1161,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Open Back Bezel Pendant, Circle 25x30.5mm, Silver, by Nunn Design (1 Piece)
You will need 1 package(s).
1 package = 1 Piece.
$4.17 / Package | SKU: PND-08249
Silver Plated Rolo Chain, 2mm, by the Foot
You will need 2 package(s).
1 package = By the Foot.
$2.59 / Package | SKU: CHA-0500
Silver Plated Open Jump Rings 4mm 22 Gauge (50 pcs)
You will need 1 package(s).
1 package = 50 Pieces.
$2.49 / Package | SKU: FJR-5454
You will need 1 package(s).
1 package = .
/ Package | SKU: FCL-7523
CASTIN CRAFT Casting Epoxy Resin Opaque Black Pigment Dye 1 Oz
You will need 1 package(s).
1 package = 1 oz..
$10.89 / Package | SKU: TRC-86
CASTIN CRAFT Casting Epoxy Resin Opaque White Pigment Dye 1 Oz
You will need 1 package(s).
1 package = 1 oz..
$10.99 / Package | SKU: TRC-87
You will need 1 package(s).
1 package = .
/ Package | SKU: TRC-51
You will need 1 package(s).
1 package = .
/ Package | SKU: XTL-1161
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

ICE Resin, Mixing Cups & White Stir Sticks (20 Pack)
$11.99 / Package | SKU: TRC-604
The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
The Beadsmith Jewelry Fine Round Nose Micro Pliers
$6.49 / Package | SKU: XTL-5514

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed