Retired - Berry & Blue Kumihimo Necklace

Retired - Berry & Blue Kumihimo Necklace

Name: Retired - Berry & Blue Kumihimo Necklace
Brand: Beadaholique Exclusive
SKU: N2253
Availability: OutOfStock

PROJECT N2253

Designer: Kat Silvia

Skill Level: Intermediate

Save to Wishlist

Printer Friendly PDF

A long Kumihimo necklace can be subtle yet striking by adding a beautiful knot and sleek tassels.

Instructions

These instructions will give you a 30" inch necklace, with the additional length of the blue portion and tassels of 8". To modify the length, adjust the number of Gold Lustered Raspberry beads accordingly. Note: You will also need a toothpick or scrap of wire for this project.

Please watch our video: How to Braid Beaded Kumihimo and Make a Bracelet. In this video you will learn how to do a 8 Strand Kumihimo Bracelet. From what you learned in the video you will cut 8 strands of red cord 7 feet in length each.
Gather all 8 cord ends and tie a simple overhand knot tying them all together. Holding the board facing up, thread this knot through the center hole.
Place the cords to the left and right of the 32 dot as well as to the left and right of the 16 dot. You will then want to place a cord to the left and right of the 24 dot and to the left and right of the 8 dot. Attach your weight to the knot after you have positioned your cords.
Now string 200 gold lustered raspberry beads on to each strand and wind the bobbins. If your bobbins are having trouble holding the weight, I suggest stringing 100 beads, then braiding and once those you get down to a bead or two, unwind the bobbin and add the remaining beads.
Begin the braiding as shown on in the video. Braid about one inch of cord before you begin adding the beads.
Continue braiding until you have added all of your beads, or reached your desired length. Then continue braiding and finish with 1 inch of braiding without beads, same as you did at the beginning.
Carefully take the braid off of the disc, trim the bobbins off and tie an overhand knot. Set this braid aside.
Repeat the above process to create the blue braid. Cut 8 strands of cord 4 feet each. String on 50 metallic riverside beads to each strand. Braid the braid. Once done, take it off the disc and tie an overhand knot.
Next, please watch our video: How to Finish a Kumihimo Braid to Fit into a Larger Clasp or Cord End. From what you have learned in the video, finish each end with an end cap. To the blue ends, attach one tassel to each using one jump ring. To the red braid, attach the clasp using jump rings as seen in the video. You can attach the clasp and tassels before you glue the ends or after. It is up to you.
The final step is to create the knot. Please watch our video: How to Make a Single Square Knot For Beaded Kumihimo.
We suggest allowing your necklace to dry for 24 to achieve a maximum bond before wearing.

WHAT YOU'LL NEED: (scroll down for purchase options)

JSH-0099 - Toho Round Seed Beads 8/0 332 'Gold Lustered Raspberry' 8 Gram Tube
Project uses 5 Tubes. You will need 5 packages.

JSH-0234 - Toho Seed Beads, Round 8/0 #YPS0015 'Hybrid ColorTrends: Metallic Riverside', 8 Grams
Project uses 2 Tubes. You will need 2 packages.

PZE-193 - Zola Elements Tassel with Pagoda Style Metal Cap 85mm, 2 Pieces, Antiqued Rhodium / Black
Project uses 2 pieces. You will need 1 package.

XCR-4325 - Super-Lon (S-Lon) Cord - Size #18 Twisted Nylon - Periwinkle Blue / 77 Yards
Project uses 1 piece. You will need 1 package.

XCR-4612 - Super-Lon (S-Lon) Cord - Size #18 Twisted Nylon - Dark Red (77 Yard Spool)
Project uses 1 piece. You will need 1 package.

FCR-4282 - Cord End, Temple Dome 14.5mm, Fits 6mm Cord, Antiqued Silver, 2 Pieces, By TierraCast
Project uses 4 pieces. You will need 2 packages.

FJR-5150 - Silver Plated Open Jump Rings 5mm 20 Gauge (x100)
Project uses 4 pieces. You will need 1 package.

FCL-1765 - TierraCast Maker's Collection, Forged Toggle Clasp Set, Silver Tone
Project uses 1 piece. You will need 1 package.

XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:

XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
XTL-5700 - Fiskars 5 Precision Tip Scissors - Super Sharp
XTL-6095 - Beadsmith Lightweight Kumihimo Round Disc Disk For Japanese Braiding and Cording 35mm Hole
XTL-6103 - Beadsmith No Tangle Flexible Plastic Thread Bobbins For Kumihimo Or Macrame 1 7/8 Inch (8 Pack)
XTL-6063 - Gator Weight For Kumihimo Braiding - 1.6 Ounces (1)

Additional Information

Theme	Boho
Ingredients	JSH-0099, JSH-0234, PZE-193, XCR-4325, XCR-4612, FCR-4282, FJR-5150, FCL-1765, XTL-1054,

Useful Techniques & Learning Guides

How to Open and Close a Jump Ring
Kumihimo 101: How to Kumihimo

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.

Toho Round Seed Beads 8/0 332 'Gold Lustered Raspberry' 8 Gram Tube

            Toho Round Seed Beads 8/0 332 'Gold Lustered Raspberry' 8 Gram Tube
        
You will need 5 package(s).
1 package = 1 Tube.

                $2.37
            
             / Package | SKU: JSH-0099

Zola Elements Tassel with Pagoda Style Metal Cap 85mm, 2 Pieces, Antiqued Rhodium / Black

            Zola Elements Tassel with Pagoda Style Metal Cap 85mm, 2 Pieces, Antiqued Rhodium / Black
        
You will need 1 package(s).
1 package = 2 Pieces.

                $4.49
            
             / Package | SKU: PZE-193

Sold out

Super-Lon (S-Lon) Cord - Size #18 Twisted Nylon - Periwinkle Blue / 77 Yards

            Super-Lon (S-Lon) Cord - Size #18 Twisted Nylon - Periwinkle Blue / 77 Yards
        
You will need 1 package(s).
1 package = 1 Spool.

                $5.35
            
             / Package | SKU: XCR-4325

Super-Lon (S-Lon) Cord - Size #18 Twisted Nylon - Dark Red (77 Yard Spool)

            Super-Lon (S-Lon) Cord - Size #18 Twisted Nylon - Dark Red (77 Yard Spool)
        
You will need 1 package(s).
1 package = 1 Bobbin.

                $4.89
            
             / Package | SKU: XCR-4612

Cord End, Temple Dome 14.5mm, Fits 6mm Cord, Antiqued Silver, 2 Pieces, By TierraCast

            Cord End, Temple Dome 14.5mm, Fits 6mm Cord, Antiqued Silver, 2 Pieces, By TierraCast
        
You will need 2 package(s).
1 package = 2 Pieces.

                $4.39
            
             / Package | SKU: FCR-4282

Silver Plated Open Jump Rings 5mm 20 Gauge (x100)

            Silver Plated Open Jump Rings 5mm 20 Gauge (x100)
        
You will need 1 package(s).
1 package = 100 Pieces.

                $5.39
            
             / Package | SKU: FJR-5150

E6000 Industrial Strength Glue Adhesive (0.18 fl oz)

            E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
        
You will need 1 package(s).
1 package = 1 Piece.

                $1.39
            
             / Package | SKU: XTL-1054