Retired - Seaside Walk Triple Wrapit Bracelet

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. To see how to complete this design please watch our video: How to Make a Triple Wrap Bracelet Using the Wrapit Loom. In this video you will see how to set up your looms to form a triple track to achieve the length of this bracelet.
2. Once you have your loom set up, cut off a length of cotton cord that is 5 feet. As seen in the video, fold it in half, add your button and tie an overhand knot. Then move towards the ends of the cord and at 22 inches, tie a second over hand knot. Then one final overhand knot about 3/4 of an inch from the last knot. Make sure this space is large enough to accommodate the button. Set your piece into the loom.
3. Then cut off 10 feet of s-lon cord. Find the center of the cord. This will be where you will begin your wraps as seen in the video. Because we are working with only one cord, and have not had to tie two pieces together, you can lay this center on top of the cotton cord, wrap each end around one side of the cotton cord and begin adding your beads. Begin with one pink bead, do a wrap, then one turquoise bead and so on until you have reached the end.
4. From what you have learned in the video, tie off and add an dab of glue to the end. Make sure you let the piece relax before added the final few beads to make sure the work is not crunched in the end.
5. Allow to dry completely, trim the ends, then it is ready to wear.

• BCS-7228 - Czech Glass Matubo, 2/0 Seed Bead, 20 Gram Tube, Turquoise Green Rembrandt
  Project uses 1 Tube. You will need 1 package.


• BCS-7204 - Czech Glass Matubo, 2/0 Seed Bead, 20 Gram Tube, Chalk Red Luster
  Project uses 1 Tube. You will need 1 package.


• XCR-4222 - Economy Waxed Cotton Necklace Cord 1.5mm Natural 10 Yards (30 Feet)
  Project uses 5 Feet. You will need 1 package.


• XCR-4249 - Super-Lon (S-Lon) Cord - Size 18 Twisted Nylon - Copper / 77 Yard Spool
  Project uses 10 Feet. You will need 1 package.


• PNT-192 - Pewter Button, Scallop Shell 13mm, Antiqued Gold Plated, 2 Pieces, By TierraCast
  Project uses 1 piece. You will need 1 package.


• XTL-1001 - G S Hypo Cement Precise Applicator Essential!
  Project uses 1 piece. You will need 1 package.

• XTL-6130 - Wrapit Beading Loom Craft Kit, Includes Beads, Nylon Cord & Instructions, Makes up to Five Bracelets
• XTL-6136 - Wrapit Professional Series Duo, Bracelet Beading Loom with 2 Tracks
• XTL-5614 - The Beadsmith Tools, Thread Snips 4.25 Inches Long, 1 Piece