Retired - Pumpkin Fields Set

PROJECT S8013
Designer: Alexandra Smith
Skill Level: Intermediate
This festive bracelet and earring set features a fall color palette painted onto antiqued brass fishbone chain. The design uses Vintaj Patina in Rust, Golden Agate, and Moss. Dangling Czech glass pumpkin beads add the perfect autumn accent.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

This bracelet uses a chain extender for adjustable length from 6 to 7.75 inches. For a longer bracelet, you may need to purchase more fishbone chain. You will need a cup of water and some paper towels to complete this project.
  1. To see how to paint Vintaj Patina onto fishbone chain, please watch this video.
  2. To prepare your chains: Begin by using flush cutters to cut 5 inches of fishbone chain for your bracelet, and two 1 inch lengths of chain for your earrings. Based on what you have learned in the video, use a paint brush to paint each link in the following order: Rust, Golden Agate, Moss. Repeat this pattern for the length of each chain, then let dry for at least 20 minutes. Flip the chains over and paint the opposite side of each link in the same manner. Again let dry for 20 minutes.
  3. To make your pumpkin dangles: Onto a head pin, slide one glass pumpkin bead. Then slide on one stem bead with the larger side facing the pumpkin (see photo for reference). Above the beads, use pliers to make a wrapped wire loop. Repeat this step two more times to prepare the pumpkin dangles for your earrings, leaving the loops open for attachment. Set aside.
  4. To attach the clasp and chain extender to your bracelet: Slide one side of your s-clasp onto one end link of your painted fishbone chain. Now use pliers to open the end link of your chain extender the same way you would open a jump ring, and slide on the other end link of your painted fishbone chain. Also slide on the wrapped wire loop of one pumpkin dangle. Close the link.
  5. To assemble your earrings: Onto the end link of a 1 inch chain that you painted in step two, latch on the wrap of a pumpkin bead from step three (see photo for reference). Close the wrap. Next, slide the loop of your earring hook onto the top link of your fishbone chain. Close the loop. Repeat this step to assemble your other earring.
  6. Enjoy your jewelry set!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • XTL-9072 - Vintaj Patina Opaque Permanent Ink - Rust Orange - 0.5 Ounce Bottle
    Project uses 1 bottle. You will need 1 package.

  • XTL-9067 - Vintaj Patina Opaque Permanent Ink - Moss Green - 0.5 Ounce Bottle
    Project uses 1 bottle. You will need 1 package.

  • XTL-0404 - Vintaj Patina, Opaque Permanent Ink For Metal, 0.5 Ounce, Golden Agate
    Project uses 1 bottle. You will need 1 package.

  • CHA-08007 - Antiqued Brass Fishbone Chain, 13mm, by the Foot
    Project uses 9 inches. You will need 1 package.

  • BCP-9026 - Czech Glass Bead Set Orange Pumpkins With Green Stems 11mm (12 Sets)
    Project uses 3 beads. You will need 1 package.

  • FCL-7806 - TierraCast Brass Oxide Finish Lead-Free Pewter Classic S-Hook Clasps 22.5mm (2)
    Project uses 1 piece. You will need 1 package.

  • AXC-91001 - Antiqued Brass 5mm Chain Necklace Extender W/ Drop 2 Inch (5)
    Project uses 1 piece. You will need 1 package.

  • FHP-5522 - Vintaj Natural Brass Head Pins 21 Gauge 2 Inch (20)
    Project uses 3 pieces. You will need 1 package.

  • FEA-3027 - Antiqued Brass Long Elegant Earring Hooks 25mm (50 Pieces)
    Project uses 2 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-0880 - Paint Brush for ICED Enamels, Patinas & Paper Sealant, 1 Brush
  • XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece
  • XTL-0034 - Wubbers Classic Series Round Nose Quality Jeweller's Pliers
  • XTL-0020 - Baby Wubbers Quality Fine Chain Nose Jeweller's Pliers
Additional Information
Theme Halloween, Autumn
Ingredients BCP-9026, FCL-7806, AXC-91001, FHP-5522, FEA-3027,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Czech Glass Bead Set Orange Pumpkins With Green Stems 11mm (12 Sets)
You will need 1 package(s).
1 package = 12 Sets.
$4.69 / Package | SKU: BCP-9026
TierraCast Brass Oxide Finish Lead-Free Pewter Classic S-Hook Clasps 22.5mm (2 Pieces)
You will need 1 package(s).
1 package = 2 Pieces.
$2.75 / Package | SKU: FCL-7806
Necklace Chain Extender, 5mm Curb Links with Drop 2 Inches, Antiqued Brass (5 Pieces)
You will need 1 package(s).
1 package = 5 Pieces.
$4.37 / Package | SKU: AXC-91001
Vintaj Natural Brass Head Pin, 2 Inches Long and 21 Gauge Thick (20 Pieces)
You will need 1 package(s).
1 package = 20 Pieces.
$2.69 / Package | SKU: FHP-5522
Earring Findings, Long Earring Hooks 25mm, Antiqued Brass (25 Pairs)
You will need 1 package(s).
1 package = 25 Pairs.
$10.49 / Package | SKU: FEA-3027
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Wubbers Classic Series Round Nose Quality Jeweller's Pliers
Baby Wubbers Quality Fine Chain Nose Jeweller's Pliers
$32.99 / Package | SKU: XTL-0020

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed