Retired - Twilight Blossoms Necklace

Name: Retired - Twilight Blossoms Necklace
Brand: Beadaholique
SKU: N7074
Availability: OutOfStock

PROJECT N7074

Designer: Rachel Zaimont

Skill Level: Advanced

Save to Wishlist

Printer Friendly PDF
(if available)

A rich, muted palette of Miyuki Delicas in a glazed finish frame pearlized cabochons in this bead embroidered landscape pendant. Create your own pendant shape or color pattern with the materials included!

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

Bead embroidery can be somewhat freeform, so you can follow the pattern or create your own design.

Remove your Lacy's Stiff Stuff beading foundation from the package. Begin by tracing a 1 inch by 1 3/4 inch rectangle on the foundation with a ruler and a pen.
Take 2 pearlized cabochons and decide where you want to place them (they will act as the centers of your beaded flowers; see photo for reference). Glue them onto the foundation using E6000. Wait about 12 hours for the glue to dry fully.
Cut a length of Nymo thread as long as you are comfortable working with, and make a triple knot on one end. Thread a size 12 beading needle.
Please watch our video on how to backstitch in bead embroidery. Backstitch a circular row of pink Delicas around each cabochon, and then use the pink and purple Delicas to create a flower petal pattern around the initial row, as shown in the photo.
Next, backstitch vertical rows of green for the grass, and horizontal rows of blue for the sky. You will need to tie off and add more Nymo thread as you work.
When you have finished your beading, trim away the foundation from your beaded area with scissors. Before you attach the ultrasuede backing, cut a 2 inch length of wire with flush cutters, make a wire bail, and then glue the bail and foundation onto your backing. Let the glue dry overnight. Trim away the excess ultrasuede with scissors.
Cut another length of Nymo and bead embroider a basic beaded edge around the outside of the piece.
Open a jump ring. Slide it through the wire bail at the top of your bead embroidery piece, and also slide on your finished chain necklace. Close the jump ring. Enjoy your necklace!

WHAT YOU'LL NEED: (scroll down for purchase options)

JK-0055 - Exclusive Beadaholique Designer Palette, Miyuki Delica Seed Bead Mix, 11/0 Size, 28.8 Grams, Santa Rosa
Project uses 1 piece. You will need 1 package.

XCR-4210 - Lacy's Stiff Stuff Beading Foundation for Cabochons 4.25 X 5.5 Inches
Project uses 1 piece. You will need 1 package.

XCR-8906 - NYMO Nylon Beading Thread Size D for Delica Beads Dark Blue 64YD (58 Meters)
Project uses 10 feet. You will need 1 package.

BPL-2021 - Acrylic Faux Pearl Flatback Cabochons 8mm - Pearlized Bronze Brown (25)
Project uses 2 pieces. You will need 1 package.

XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
Project uses 1 piece. You will need 1 package.

XCR-4376 - Beadsmith Ultra Suede For Beading Foundation And Cabochon Work 8.5x4.25 Inches - Camel
Project uses 1 piece. You will need 1 package.

WCR-2230 - Artistic Wire, Silver Plated Craft Wire 22 Gauge Thick, 8 Yard Spool, Tarnish Resistant Silver
Project uses 2 inches. You will need 1 package.

AXC-98946 - Silver Plated Fine Rolo Chain Necklace - 2mm Diameter Links 18 Inches Long
Project uses 1 piece. You will need 1 package.

FJR-3911 - Silver Plated Open Jump Rings 4mm 20 Gauge (50)
Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:

XTL-3006 - Beadsmith English Beading Needles Size 12 (4 Needles)
XTL-5700 - Fiskars 5 Precision Tip Scissors - Super Sharp
XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
XTL-0074 - Eurotool Nylon Jaw Pliers Chain Nose- For Scratch-Free Wire Work

Additional Information

Ingredients

XCR-4210, XCR-8906, XTL-1054, XCR-4376, WCR-2230, AXC-98946, FJR-3911,

Useful Techniques & Learning Guides

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.

Lacy's Stiff Stuff Beading Foundation for Cabochons 4.25 X 5.5 Inches

            Lacy's Stiff Stuff Beading Foundation for Cabochons 4.25 X 5.5 Inches
        
You will need 1 package(s).
1 package = 1 Piece.

                $3.39
            
             / Package | SKU: XCR-4210

NYMO Nylon Beading Thread Size D for Delica Beads Dark Blue 64YD (58 Meters)

            NYMO Nylon Beading Thread Size D for Delica Beads Dark Blue 64YD (58 Meters)
        
You will need 1 package(s).
1 package = 1 Spool.

                $2.19
            
             / Package | SKU: XCR-8906

E6000 Industrial Strength Glue Adhesive (0.18 fl oz)

            E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
        
You will need 1 package(s).
1 package = 1 Piece.

                $2.19
            
             / Package | SKU: XTL-1054

The Beadsmith Ultra Suede For Beading Foundation And Cabochon Work 8.5x4.25 Inches - Camel

            The Beadsmith Ultra Suede For Beading Foundation And Cabochon Work 8.5x4.25 Inches - Camel
        
You will need 1 package(s).
1 package = 1 Tube.

                $4.74
            
             / Package | SKU: XCR-4376

Sold out

Artistic Wire, Silver Plated Craft Wire 22 Gauge Thick, Tarnish Resistant Silver (8 Yard Spool)

            Artistic Wire, Silver Plated Craft Wire 22 Gauge Thick, Tarnish Resistant Silver (8 Yard Spool)
        
You will need 1 package(s).
1 package = 1 Spool.

                $8.75
            
             / Package | SKU: WCR-2230

Finished Rolo Chain Necklace, Round Links with Lobster Clasp 2mm, 18 Inches, Silver Plated

            Finished Rolo Chain Necklace, Round Links with Lobster Clasp 2mm, 18 Inches, Silver Plated
        
You will need 1 package(s).
1 package = 1 Piece.

                $5.55
            
             / Package | SKU: AXC-98946

Silver Plated Open Jump Rings 4mm 20 Gauge (50 pcs)

            Silver Plated Open Jump Rings 4mm 20 Gauge (50 pcs)
        
You will need 1 package(s).
1 package = 50 Pieces.

                $2.25
            
             / Package | SKU: FJR-3911

Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith English Beading Needles Size 12 (4 pcs)

$3.59 / Package | SKU: XTL-3006

/ Package | SKU: XTL-5700

Xuron Micro-Shear Flush Cutter Pliers - Cuts Up To 18 Gauge Wire (1mm) Thick, (1 Piece)

$16.85 / Package | SKU: XTL-5600

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

$6.49 / Package | SKU: XTL-5511

The Beadsmith Jewelry Fine Round Nose Micro Pliers

$6.49 / Package | SKU: XTL-5514

Sold out

Eurotool Nylon Jaw Pliers Chain Nose- For Scratch-Free Wire Work

$10.19 / Package | SKU: XTL-0074

You recently viewed

Clear recently viewed

1 second ago

Retired - Twilight Blossoms Necklace

A rich, muted palette of Miyuki Delicas in a glazed finish frame pearlized cabochons in this bead embroidered landscape pendant. Create your own pe...

View full details

View Project

14 seconds ago

Retired - Hawaii Life Necklace

Invoking the spirit of the islands, the Hawaii Life necklace is rich in texture and color. The leaves dangle delightfully from an embossed center r...

View full details

View Project

14 seconds ago