Crescent Arc Necklace

PROJECT N8029
Designer: Alexandra Smith
Skill Level: Intermediate
Discover the rustic beauty of Zola Elements in this artisan wire wrapped necklace design. The crescent pendant is wire wrapped with Miyuki round 11/0 seed beads, framing a Zola Elements monochromatic inverted drop charm.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

These instructions will make a 17.5 inch necklace. For a longer or shorter necklace, choose your desired chain lengths.
  1. If you are new to wire wrapping, begin by watching the video: How to Wire Wrap Beads onto a Form.
  2. Using what you have learned in the video, use flush cutters to cut 16 inches of 26 gauge wire. Take your pendant and begin wire wrapping 0.25 inches into the crescent by coiling around three times with one end of the wire. Make sure that as you are wrapping, you are always going in the same direction.
  3. Onto the wire, string one seed bead. Continue wrapping 2 times. Repeat this step 6 more times for a total of 7 wire wrapped beads. This should bring you about to the center of your pendant. After you have added the seventh bead, coil 3 times and clip the excess wire.
  4. Wire wrap the second half of your pendant in the same manner as you did in step 3, leaving a slight space after your last coil (see photo for reference).
  5. To hang your charm, use pliers to open a jump ring and slide on the top loop of your charm. Also slide on the center of your pendant at the point between the two wire wrapped sections (make sure your charm is facing forward). Close the jump ring.
  6. Next, use flush cutters to cut two 7.5 inch lengths of chain.
  7. To attach the chain to your pendant, open a jump ring and slide on the end link of one length of chain. Also slide on one end loop of your pendant. Close the jump ring. Repeat this step to attach chain to the other side of your pendant.
  8. To add your clasp, open a jump ring and slide on the end link of the chain on one side of your pendant. Also slide on the loop of your clasp. Close the jump ring.
  9. Open another jump ring and slide on the end link of the chain on the other side of your pendant. Close the jump ring. Enjoy your necklace!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • FCO-3343 - Zola Elements Pendant Link, Arc Cutout Focal 50x20mm, 1 Piece, Antiqued Silver Tone
    Project uses 1 piece. You will need 1 package.

  • PZE-149 - Zola Elements Charm, Monochromatic Inverted Drop 12x21mm, 2 Pieces, Silver Tone
    Project uses 1 piece. You will need 1 package.

  • DMRR-0592 - Miyuki Round Seed Beads, 11/0 Size, 8.5 Gram Tube, 592 Ivory Ceylon
    Project uses 1 tube. You will need 1 package.

  • CHA-9813 - Nunn Design Antiqued Nunn Design Silver Plated Oval Cable Chain 3mm By The Ft
    Project uses 15 inches. You will need 2 packages.

  • FJR-5454 - Silver Plated Open Jump Rings 4mm 22 Gauge (50)
    Project uses 4 pieces. You will need 1 package.

  • FCL-7522 - Nunn Design Antiqued Silver Plated Lobster Clasps 12mm (2)
    Project uses 1 piece. You will need 1 package.

  • WNT-2630 - Beadsmith Tarnish Resistant Silver Color Copper Wire 26 Gauge 34 Yards (31 Meters)
    Project uses 32 inches. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece
  • XTL-0034 - Wubbers Classic Series Round Nose Quality Jeweller's Pliers
  • XTL-0020 - Baby Wubbers Quality Fine Chain Nose Jeweller's Pliers
Additional Information
Theme Yoga, Vintage Look, Boho
Ingredients FCO-3343, PZE-149, DMRR-0592, CHA-9813, FJR-5454, FCL-7522, WNT-2630,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Tip: Save this project to your wishlist to easily return to project instructions.
Zola Elements Pendant Link, Arc Cutout Focal 50x20mm, Antiqued Silver Tone (1 Piece)
You will need 1 package(s).
1 package = 1 Piece.
$1.45 / Package | SKU: FCO-3343
Zola Elements Charm, Monochromatic Inverted Drop 12x21mm, Silver Tone (2 Pieces)
You will need 1 package(s).
1 package = 2 Pieces.
$6.59 / Package | SKU: PZE-149
Miyuki Round Seed Beads, 11/0 Size, #592 Ivory Ceylon (8.5 Gram Tube)
You will need 1 package(s).
1 package = 8.5 Gram Tube.
$2.39 / Package | SKU: DMRR-0592
Nunn Design Antiqued Silver Plated Oval Cable Chain, 2.3mm, by the Foot
You will need 2 package(s).
1 package = By the Foot.
$4.17 / Package | SKU: CHA-9813
Silver Plated Open Jump Rings 4mm 22 Gauge (50 pcs)
You will need 1 package(s).
1 package = 50 Pieces.
$2.49 / Package | SKU: FJR-5454
Nunn Design Lobster Clasps, Curve 12mm, Antiqued Silver Plated (2 Pieces)
You will need 1 package(s).
1 package = 2 Pieces.
$2.59 / Package | SKU: FCL-7522
Wire Elements, Tarnish Resistant Silver Color Copper Wire, 26 Gauge 34 Yards (31 Meters)
You will need 1 package(s).
1 package = 1 Spool.
$9.75 / Package | SKU: WNT-2630
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Wubbers Classic Series Round Nose Quality Jeweller's Pliers
Baby Wubbers Quality Fine Chain Nose Jeweller's Pliers
$32.99 / Package | SKU: XTL-0020

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed