Retired - Violet Bracelet

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Finish one end of the cut memory wire with a simple loop. To see how to do this, please watch the video: How to Finish Memory Wire Ends.
2. String onto your memory wire: 16 metallic silver 6mm Czech Glass druk beads, 19 dark silver pearlized 8mm Czech glass round beads, and 16 dark amethyst 6mm Czech Glass druk beads. Create a simple loop after you last bead and cut off excess memory wire.
3. Place onto a head pin 1 metallic silver 6mm Czech Glass druk beads. Create a simple wire loop after the bead and snip off excess wire. Repeat this step with another head pin and a 6mm Czech Glass druk bead
4. Open the simple wire loops in the dangles above (the same way you would open a jump ring) and connect one to each of the loops on the bracelet. Close the loops back up.
5. All done!

• BCP-7607 - Czech Glass Druk Round Beads 6mm Metallic Silver (50)
  Project uses 33 pieces. You will need 1 package.


• BCP-7642 - Czech Glass Druk Round Beads 6mm Dark Amethyst (50)
  Project uses 33 pieces. You will need 1 package.


• BCP-10408 - Czech Fire Polished Glass Beads 8mm Round Full Pearlized - Dark Gray (25)
  Project uses 19 pieces. You will need 1 package.


• WXM-020 - Bright Silver Color Bracelet Memory Wire 12 Loops
  Project uses 3 loops. You will need 1 package.


• FHP-6304 - Silver Plated Head Pins 1 Inches Long/21 Gauge (50)
  Project uses 2 pieces. You will need 1 package.

• XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
• XTL-5612 - Beadalon Memory Wire Shears Cutting Pliers -Strong & Easy
• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose