Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
- Begin by watching our video on how to add a charm to a bail using a headpin. Attach your pinch bail and charm to the focal gemstone as shown in the video.
- Cut an 18 inch length of braided faux leather cord. Thread the cord through the pinch bail at the top of the gemstone.
- Place a drop of E6000 on one of the tips of the cord and fit one silver cord end into place. Repeat for the other end of the cord. Wait a few minutes for the glue to dry.
- Open a jump ring and slide on the loop of your toggle clasp. Attach it to the loop of one silver cord end.
- Open another jump ring and slide on the loop of your toggle bar. Attach it to the loop of the other silver end cap. Close your clasp, and enjoy your necklace!
WHAT YOU'LL NEED: (scroll down for purchase options)
- SPJA-119 - Turquoise Jasper Large Oval Focal Pendant 35X45mm (1)
Project uses 1 piece. You will need 1 package.
- FCO-1300 - Antiqued Silver Filigree Pinch Bail, Ornate Scroll Design 12.5x13mm, 2 Pieces, Antiqued Silver
Project uses 1 piece. You will need 1 package.
- PND-5101 - TierraCast Fine Silver Plated Pewter Floating Lotus Charm 17mm (1)
Project uses 1 piece. You will need 1 package.
- XCR-8014 - Braided Faux Leather Cord 3.5mm - Brown - Pack of 1 Meter
Project uses 18 inches. You will need 1 package.
- FCR-1635 - Silver Plated Barrel Cord Ends With Rings 8.5mm Long - Fits 3.5mm Cord (6)
Project uses 2 pieces. You will need 1 package.
- FHP-5325 - Silver Plated Head Pins 2 Inches/21 Gauge (X50)
Project uses 1 piece. You will need 1 package.
- FCL-9360 - TierraCast Antiqued Silver Plated Lead-Free Pewter Flower Toggle Clasp 16.5mm - 1 Set
Project uses 1 set. You will need 1 package.
- FJR-5150 - Silver Plated Open Jump Rings 5mm 20 Gauge (x100)
Project uses 2 pieces. You will need 1 package.
- XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
Project uses 1 piece. You will need 1 package.
RECOMMENDED TOOLS:- XTL-0020 - Baby Wubbers Quality Fine Chain Nose Jeweller's Pliers
- XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
- XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex