Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
This necklace measures approximately 17.5 inches. To modify the length, simply adjust the length of chain on both sides respectively.
- Begin by cutting two lengths of chain, 8 inches each.
- Open one jump ring and attach it to one loop of the eye link and one end of the chain. Close the jump ring. Repeat on the other side of the eye link with the second length of chain.
- Move to the end of the chain and attach another jump ring.
- Then move to the other end of the other length of chain, open and jump ring and attach it to the chain as well as to one lobster clasp. Close the jump ring.
WHAT YOU'LL NEED: (scroll down for purchase options)
- FCL-2509 - Beautiful Gold Plated Curved Lobster Clasps 8mm (10)
Project uses 1 piece. You will need 1 package.
- CHA-9631 - Antiqued 22K Gold Plated Oval Cable Chain 2mm Bulk By The Foot
Project uses 16 Inches. You will need 2 packages.
- FJR-5240 - 22K Gold Plated Open Jump Rings 4mm 21 Gauge (x100)
Project uses 4 pieces. You will need 1 package.
- PZE-119 - Zola Elements Pendant Link, Mermaid Eye 26x14mm, 1 Piece, Antiqued Gold Tone
Project uses 1 piece. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece
- XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
- XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers