Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
In addition to the materials listed above, we also recommend using a face mask and some disposable gloves for safety. Be sure to cover your work surface when using resin. To complete this project, you will also need a toothpick and a heat source such as a lighter or small torch.
- Set up your moon and star bezels in a well-ventilated and dust-free area.
- Take a small pinch of JudiKins Glitter Rox in Quicksilver and fill the gold moon bezel so the glitter is level with the sides of the bezel. In this same manner, fill the silver star bezel with Glitter Rox in Dollar Gold.
- Please watch our video on how to use Nunn Design Resin. Put on your face mask and disposable gloves. Based on the technique shown in the video, mix the resin in a mixing cup and stir with a craft stick gently until all striations are gone. Set aside.
- Use a toothpick to carefully drip the resin into each bezel until it reaches the edge to form a low dome. Use your toothpick to gently guide the resin into the Glitter Rox and into the corners of both bezel.
- Let the resin harden and cure for three days before proceeding.
- Once the resin has cured, use pliers to attach a gold earring hook onto the loop of your star bezel. Then attach a silver earring hook onto your moon bezel. Enjoy your earrings!
WHAT YOU'LL NEED: (scroll down for purchase options)
- PND-113 - Nunn Design Mini Bezel Pendant, Crescent Moon 11.5x18.5mm, 1 Piece, Antiqued Gold
Project uses 2 pieces. You will need 1 package.
- PND-117 - Nunn Design Mini Bezel Pendant, Star 16x18.5mm, 1 Piece, Antiqued Silver
Project uses 2 pieces. You will need 1 package.
- XTL-1197 - JudiKins Glitter Roxs, Shard Glass, 14 Gram Container, Quicksilver
Project uses 1 pinch. You will need 1 package.
- XTL-1196 - Judikins Glitter Roxs, Shard Glass, 14 Gram Container, Dollar Gold
Project uses 1 pinch. You will need 1 package.
- FEA-3030 - 22K Gold Plated Long Elegant Earring Hooks 25mm (50)
Project uses 1 piece. You will need 1 package.
- FEA-3025 - Silver Plated Long Elegant Earring Hooks 25x16.5mm (50)
Project uses 1 piece. You will need 1 package.
- TRC-14 - Nunn Design 2-Part Epoxy Resin Kit, Jewelers Grade Clear, 8 Oz Kit
Project uses 1 kit. You will need 1 package.
RECOMMENDED TOOLS:- XTL-101 - Micro Grip Pliers, Long Chain Nose, 5 Inches Long, 1 Piece
- XTL-103 - Micro Grip Pliers, Bent Chain Nose, 5 Inches Long, 1 Piece