Retired - Spartan Cuff

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Cut a hole into your box. You want to position the cuff so that the triangle bezel is level. Note: This design requires two resin pours several days apart so you will have extra resin. Try having molds or other bezels ready to use the left over resin.
2. For this next step please watch: How to Use Nunn Design Resin. Mix your resin.
3. Then watch: How to Add Opaque Pigments to 2-Part Resin and add a drop of opaque white dye as seen in the video. Add the dye slowly to get the desired color. You may need to add another small drop.
4. Once your resin is mixed, drip it into the triangle bezel. Allow to set for a minute.
5. Use a heat source to get rid of any bubbles. Wave the lighter close to the top of the bezel to pop the bubbles. Allow to dry 1-3 days before moving.
6. Repeat the above process for the circle bezel. Set it in the box so it is level. Mix the resin, add a tiny drop of green and a tiny drop of white, or until you get your desired color. Drip it into the bezel and allow to dry 1-3 days before moving.
7. Once it's dry, you're all done!

• JB-2710 - Nunn Design Cuff Bracelet, Triangle Bezel 15mm/Circle Bezel 8mm, 1 Bracelet, Antiqued Gold
  Project uses 1 piece. You will need 1 package.


• TRC-87 - CASTIN CRAFT Casting Epoxy Resin Opaque White Pigment Dye 1 Oz
  Project uses 1 piece. You will need 1 package.


• TRC-14 - Nunn Design 2-Part Epoxy Resin Kit, Jewelers Grade Clear, 8 Oz Kit
  Project uses 1 piece. You will need 1 package.


• TRC-83 - CASTIN CRAFT Casting Epoxy Resin Opaque Green Pigment Dye 1 Oz
  Project uses 1 piece. You will need 1 package.