Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
You will also need a paper towel for this project. This finished bracelet measure approximately 6.5 inches. To adjust the length, simply adjust the length of chain respectively.
- Begin by adding Vintaj Patina to the charm. Please watch our video: How to Use Vintaj Patinas. From what you learned in the video, use your paint brush to add a dab of patina to the charm. Wipe away any excess. Set this piece aside.
- Cut 6 inches of chain. When you cut this chain, you will cut the center bar that runs through the bead, making sure to leave two links along the chain exposed.
- Open one jump ring and attach it to the last two links of the chain and to one end of the magnetic clasp. Close the jump ring. Repeat on the other side.
- Finally, open one more jump ring and attach it to the chain link in between the first and second turquoise beads closest to the clasp (Please see photo for reference). Close the jump ring.
WHAT YOU'LL NEED: (scroll down for purchase options)
- FCL-6807 - Magnetic Clasp, 6x4.5mm, 4 Clasp Sets, 22K Gold Plated
Project uses 1 piece. You will need 1 package.
- PND-3309 - Nunn Design Itsy Charm, Om / Aum 9mm, 1 Piece, Antiqued Gold Plated
Project uses 1 piece. You will need 1 package.
- CHA-1222 - Zola Elements Bulk Chain, Beaded Cable Links 6mm, By the Foot, Unfinished Brass/Turquoise
Project uses 6 Inches. You will need 1 package.
- FJR-5452 - 22K Gold Plated Open Jump Rings 4mm 22 Gauge (50)
Project uses 3 pieces. You will need 1 package.
- XTL-9069 - Vintaj Patina Opaque Permanent Ink - Purple Opalite - 0.5 Ounce Bottle
Project uses 1 piece. You will need 1 package.
RECOMMENDED TOOLS:- XTL-880 - ICE Resin, Angled Paint Brushes for ICED Enamels & Paper Sealant, 6 Pack
- XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece
- XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
- XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose