Retired - Ruby Gemstone and Pearl Necklace

PROJECT N750
Designer: Julie Bean
Skill Level: Beginner
This heirloom necklace features a lovely faceted ruby gemstone bezel pendant accented by pearl and gold vermeil chain. You and your loved ones will treasure this stunning piece of jewelry for years to come.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

Note: These instructions make a 16 inch necklace and you are ordering the exact amount of chain needed. If you want to make a longer necklace, make sure to order more chain.
  1. This entire project is demonstrated at the end of the video: Product Spotlight: Gemstone Bezel Pendants and Links. However, if you want written instructions, please see below.
  2. Check your gemstone chain and make sure that you have an intact loop on each end. If your chain does not have an intact loop on each end, please watch the video: How to Properly Cut Gemstone Chain and cut your chain.
  3. Open a 4mm jump ring and slip it onto one end of your chain. Also slide on the clasp. Close the jump ring.
  4. On the other side of your chain, open and link a 4mm jump ring. Also link onto this jump ring a closed 5mm jump ring. Close the 4mm jump ring.
  5. Your pearl necklace is now done. To add the ruby bezel pendant, open another 4mm jump ring, connect it to the pendant (do not close). Now find the mid way point of your pearl necklace and link the jump ring around the chain. Close the jump ring.
  6. Enjoy!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • SPRU-204 - Ruby Faceted Gemstone Briolette Handcrafted Gold Vermeil Bezel Pendant - 18x20mm (1)
    Project uses 1 piece. You will need 1 package.

  • FJR-03045 - 14K Gold Filled Open Jump Rings 4mm 21 Gauge (10)
    Project uses 2 pieces. You will need 1 package.

  • FJR-4056 - 14K Gold Filled Closed Jump Rings 5mm 20 Gauge (x10)
    Project uses 1 piece. You will need 1 package.

  • FCL-02105 - 14/20 Gold Filled Curved Lobster Clasps 8mm (2)
    Project uses 1 piece. You will need 1 package.

  • CHX-1019 - White Seed Pearl Gold Vermeil Wire Wrapped Chain 3.5mm - By The Inch
    Project uses 16 inches. You will need 16 packages.

RECOMMENDED TOOLS:
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
Additional Information
Theme Special Occasion
Ingredients FJR-03045, FJR-4056, FCL-02105, CHX-1019,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
14K Gold-Filled Open Jump Rings 4mm 21 Gauge (10 pcs)
You will need 1 package(s).
1 package = 10 Pieces.
$7.29 / Package | SKU: FJR-03045
14K Gold-Filled Closed Jump Rings 5mm 20 Gauge (10 pcs)
You will need 1 package(s).
1 package = 10 Pieces.
$17.29 / Package | SKU: FJR-4056
Lobster Clasps, Curve 8mm, 14K Gold-Filled (2 Pieces)
You will need 1 package(s).
1 package = 2 Pieces.
$6.49 / Package | SKU: FCL-02105
You will need 16 package(s).
1 package = .
/ Package | SKU: CHX-1019
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed