Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
This necklace measures 20 inches. To change the length simply modify the length of chain on each side of the necklace.You will also need a paper towel for this project.
- Please watch our video: How to Use Vintaj Patinas. From what you learned in the video, add a dab of patina to your work surface. Take your paint brush and dab on a little patina over the "leaves and branches" of the charm. Wipe off any excess patina. Set the charm aside.
- Cut two lengths of silver chain, 8 inches each.
- Open one jump ring and attach it to the end of one piece of chain. Close the jump ring.
- Move to the end of this piece of chain, open another jump ring and attach the 3 inches of gemstone chain. Close the jump ring.
- Move to the other end of the gemstone chain, open another jump ring and attach the second piece of 8 inch chain. Close the jump ring.
- At the end of this chain open another jump ring and attach a lobster clasp to the end. Close the jump ring.
- Open another jump ring and attach the charm around the center of the length of gemstone chain.
WHAT YOU'LL NEED: (scroll down for purchase options)
- CHX-1064 - Opalite Glass Drops Gemstone Sterling Silver Wire Wrapped Chain 4mm Rondelles - By The In.
Project uses 3 Inches. You will need 3 packages.
- CHX-1238 - GenY Chain, Oval Cable Links 3x6.5mm, 1 Inch, Forever Silver
Project uses 16 Inches. You will need 16 packages.
- FJR-1347 - GenY Jump Rings, Open Oval 3.5x5 21 Gauge, 10 Pieces, Forever Silver
Project uses 5 pieces. You will need 1 package.
- PND-08348 - Nunn Design Charm, Rocky Mountain 20mm, 1 Piece, Antiqued Silver
Project uses 1 piece. You will need 1 package.
- XTL-9066 - Vintaj Patina Opaque Permanent Ink - Marine Blue - 0.5 Ounce Bottle
Project uses 1 piece. You will need 1 package.
- FCL-7523 - Nunn Design Silver Plated Lobster Clasps 12mm (2)
Project uses 1 piece. You will need 1 package.
RECOMMENDED TOOLS:- XTL-880 - ICE Resin, Angled Brushes for ICED Enamels & Paper Sealant, 6 Pack
- XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
- XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
- XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex