Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
This bracelet will fit a 6.25 inch wrist. Simply adjust by adding or subtracting the dangles and/or the jump rings.
- Take one head pin and string on one pom followed by one bead cap and one 3mm bead. Make sure that your headpin is going through the sturdy core of the pom. Make a wrapped wire loop. Trim any excess wire. Repeat for 12 more palms.
- Open one jump ring and attach it to the bar of the toggle clasp. Close the jump ring.
- Attach one jump ring to the one you just added, by using the same manner as above.
- Attach one jump ring to the one you just added.
- Attach one jump ring to the one you just added, but before closing the jump ring, string on one of the poms.
- Attach one jump ring to the one you just added. Then add another jump ring with a pom on it. Follow this pattern to alternate the jump rings and jump rings with poms on them. As you work, make sure all the poms are hanging on the same side of the bracelet.
- When you come to the last pom, add 3 more jump rings, attaching the last one to the other side of the toggle clasp.
Please note that you will receive a multi-color bag of pom poms. Choose your favorite colors to use in this project.
WHAT YOU'LL NEED: (scroll down for purchase options)
- POM-0002 - Pom Pom Embellishments, Round Small 15mm, 5 Grams, Assorted Colors
Project uses 13 pieces. You will need 1 package.
- FCL-7009 - TierraCast 22K Gold Plated Pewter Hammertone Ellipse Toggle Clasp 16mm (1)
Project uses 1 piece. You will need 1 package.
- FJR-5176 - 22K Gold Plated Open Jump Rings 7mm 18 Gauge (50)
Project uses 31 pieces. You will need 1 package.
- BMB-3491 - TierraCast 22K Gold Plated Pewter Hammered Bead Caps 6mm (x 8)
Project uses 13 pieces. You will need 1 package.
- FHP-3028 - 22K Gold Plated Ball Head Pins 22 Gauge 2 Inch (x20)
Project uses 13 pieces. You will need 1 package.
- BMB-5013 - 22K Gold Plated Square Rounded Beads 3mm (100)
Project uses 13 pieces. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
- XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
- XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers