Retired - Starlit Rose Earrings

Name: Retired - Starlit Rose Earrings
Brand: Beadaholique
SKU: E7014
Availability: OutOfStock

PROJECT E7014

Designer: Rachel Zaimont

Skill Level: Advanced

Save to Wishlist

Printer Friendly PDF
(if available)

JudiKins Glitter Roxs gleam like dewy rose petals suspended in resin in these glamorous earrings, featuring Nunn Design antiqued gold bezels.

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

In addition to the materials listed above, we also recommend using a face mask and some disposable gloves for safety while working with resin.

Set up all four of your bezels in a well-ventilated and dust-free area. You can poke the earring posts through a shoebox so they will lay flat and create a level surface for the resin. Take a few pinches of JudiKins Glitter Roxs and fill each bezel so the glitter is level with the sides of the bezel.
Please watch our video on how to use Ice Resin. Put on your face mask and disposable gloves. Based on the technique shown in the video, mix the resin in a mixing cup and stir with a popsicle stick gently until all striations are gone. Set aside.
Use the popsicle stick to drip the resin into each bezel one drop at a time until it reaches the edges of the bezel and you create a low dome.
Let the resin harden and cure for three days before proceeding.
Once the resin has cured, open a jump ring and attach it to the loop on one earring bezel and the loop on one charm bezel. Close the jump ring, connecting the components.
Repeat step 5 to make your second earring. Enjoy!

WHAT YOU'LL NEED: (scroll down for purchase options)

XTL-1198 - JudiKins Glitter Roxs, Shard Glass, 14 Gram Container, Copper Rose Pink
Project uses 1 piece. You will need 1 package.

FEA-8230 - Nunn Design Antiqued 24kt Gold Plated Round Bezel Earring Post 13mm (2)
Project uses 2 pieces. You will need 1 package.

PND-08271 - Nunn Design Charm, Itsy Circle Bezel 10.5x14mm, 2 Pieces, Antiqued Gold
Project uses 2 pieces. You will need 1 package.

FJR-5250 - 22K Gold Plated Open Jump Rings 5mm 20 Gauge (100)
Project uses 2 pieces. You will need 1 package.

TRC-10 - ICE Resin Jewelers Grade Clear Casting Epoxy Resin 8 oz Kit
Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:

XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers

Additional Information

Ingredients

FEA-8230, FJR-5250, TRC-10,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.

Nunn Design Antiqued 24kt Gold Plated Round Bezel Earring Post 13mm (1 Pair)

            Nunn Design Antiqued 24kt Gold Plated Round Bezel Earring Post 13mm (1 Pair)
        
You will need 1 package(s).
1 package = 1 Pair.

                $7.69
            
             / Package | SKU: FEA-8230

22K Gold Plated Open Jump Rings 5mm 20 Gauge (100 pcs)

            22K Gold Plated Open Jump Rings 5mm 20 Gauge (100 pcs)
        
You will need 1 package(s).
1 package = 100 Pieces.

                $4.94
            
             / Package | SKU: FJR-5250

Sold out

ICE Resin Jewelers Grade Clear Casting Epoxy Resin 8 oz Kit

            ICE Resin Jewelers Grade Clear Casting Epoxy Resin 8 oz Kit
        
You will need 1 package(s).
1 package = 8 oz..

                $36.69
            
             / Package | SKU: TRC-10