Retired - Down the Aisle Bridal Bouquet Charm

Retired - Down the Aisle Bridal Bouquet Charm

Name: Retired - Down the Aisle Bridal Bouquet Charm
Brand: Beadaholique
SKU: C7010
Availability: OutOfStock

PROJECT C7010

Designer: Rachel Zaimont

Skill Level: Beginner

Save to Wishlist

Printer Friendly PDF

Bring a beloved photograph of loved ones with you as you walk down the aisle, framed in this meaningful wedding bouquet charm. A ring of crystal cup chain gives the piece sparkle, and antiqued brass findings lend vintage allure.

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

This project bundle does not come with the image shown in the bezel. Please supply your own image of a loved one, printed on photo paper, to place into the bezel. In addition to the materials listed, you will also need some toothpicks and paper towels to complete this project.

To learn how to make this bouquet charm from start to finish, please watch the video: How to Make Bridal Bouquet Charms to Personalize Your Wedding. This charm is the second project shown in the video. In the video you'll see how to affix your image to the bezel, seal it and coat it with glaze, and surround the bezel with a border of sparkling crystal cup chain.
Wrap the ribbon around your bouquet of flowers and tie a bow. Enjoy!

WHAT YOU'LL NEED: (scroll down for purchase options)

PND-6543 - Antiqued Brass Bezel Pendant Beaded Edge 29x38mm (1)
Project uses 1 piece. You will need 1 package.

XTL-1020 - JudiKins Diamond Glaze Water Based Adhesive (2 Fl. Oz.)
Project uses 1 piece. You will need 1 package.

XTL-1032 - Nunn Design Sealant Protectant 2 oz. - For Patera Findings (1)
Project uses 1 piece. You will need 1 package.

XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
Project uses 1 piece. You will need 1 package.

CHA-10109 - Czech Crystal Brass Rhinestone Cup Chain 24PP Crystal (By The Foot)
Project uses 1 foot. You will need 1 package.

XCR-48095 - Silk Fabric Flat Silky Ribbon, 2cm Wide, 42 Inches Long, 1 Strand, Cream White
Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:

XTL-5700 - Fiskars 5 Precision Tip Scissors - Super Sharp
XTL-880 - ICE Resin, Angled Paint Brushes for ICED Enamels & Paper Sealant, 6 Pack
TRC-600 - Art Mechanique, ICE Resin Mixing Cups & Stir Sticks, 5 Pack
XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex

Additional Information

Ingredients

PND-6543, XTL-1020, XTL-1032, XTL-1054, CHA-10109, XCR-48095,

Useful Techniques & Learning Guides

Mixed Media 101: Creating Mixed Media Jewelry

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.

JudiKins Diamond Glaze Water Based Adhesive (2 Fl. Oz.)

            JudiKins Diamond Glaze Water Based Adhesive (2 Fl. Oz.)
        
You will need 1 package(s).
1 package = 2 fl. oz..

                $10.99
            
             / Package | SKU: XTL-1020

E6000 Industrial Strength Glue Adhesive (0.18 fl oz)

            E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
        
You will need 1 package(s).
1 package = 1 Piece.

                $1.89
            
             / Package | SKU: XTL-1054

Sold out

Preciosa Czech Crystal Rhinestone Cup Chain, 24PP, Crystal/Brass, by the Foot

            Preciosa Czech Crystal Rhinestone Cup Chain, 24PP, Crystal/Brass, by the Foot
        
You will need 1 package(s).
1 package = By The Foot.

                $2.45
            
             / Package | SKU: CHA-10109