Retired - Bride of Dracula Earrings

PROJECT E119
Designer: Andrea Morici
Skill Level: Beginner
These lovely, slightly sinister earrings aren't just for Halloween! Wear them whenever you are feeling a bit vampish.
Instructions
  1. Remember to double the instructions to make both earrings! Cut a piece of chain two and a half inches long.
  2. Attach one end of the chain to one of the points on the filigree stamping using a jump ring.
  3. Thread a cathedral bead onto a headpin and make a simple loop. Trim off excess wire.
  4. Gently open the loop on the headpin and thread it though the last link on the other end of the chain. Close the loop again.
  5. To the other point on the filigree stamping, add a jump ring. Add another jump ring to the first.
  6. Thread the last jump ring through the loop on the leverback earring hook and close the jump ring.
  7. Using a toothpick, dab a tiny amount of E6000 glue on the back of your rhinestone and place it in the center of the filigree stamping. The glue will set in about six minutes, but it takes up to twenty four hours to dry fully.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • FEA-05014 - Earring Findings, Leverback with Shell Design 17x10mm, 2 Pieces, Sterling Silver
    Project uses 2 pieces. You will need 1 package.

  • CHA-9650 - Antiqued Silver Plated Textured Cable Chain 2.3mm Bulk By The Foot
    Project uses 1 foot. You will need 1 package.

  • BCP-6720 - Czech Cathedral Glass Beads 6mm Ruby Red/Silver Ends (25)
    Project uses 2 pieces. You will need 1 package.

  • FHP-02315 - Sterling Silver Head Pins 22 Gauge 1.5 Inch (10)
    Project uses 2 pieces. You will need 1 package.

  • FJR-03046 - Sterling Silver Open Jump Rings 4mm 21 Gauge (20)
    Project uses 6 pieces. You will need 1 package.

  • FCO-7007 - Antiqued Silver Plated Ornate Filigree Diamond Connector Links 21mm (4)
    Project uses 6 pieces. You will need 1 package.

  • SWF-40986 - Swarovski Crystal, Round Flatback Rhinestone SS9 2.5mm, 72 Pieces, Light Siam
    Project uses 2 pieces. You will need 1 package.

  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 piece. You will need 1 package.

Additional Information
Theme Halloween
Ingredients FEA-05014, CHA-9650, BCP-6720, FHP-02315, FJR-03046, FCO-7007, SWF-40986, XTL-1054,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Earring Findings, Leverback with Shell Design 17x10mm, 2 Pieces, Sterling Silver
You will need 1 package(s).
1 package = 1 Pair.
$3.79 / Package | SKU: FEA-05014
Antiqued Silver Plated Textured Cable Chain, 2.3mm, by the Foot
You will need 1 package(s).
1 package = By The Foot.
$1.85 / Package | SKU: CHA-9650
Sterling Silver Head Pins 22 Gauge 1.5 Inch (10)
You will need 1 package(s).
1 package = 10 Pieces.
$7.99 / Package | SKU: FHP-02315
Sterling Silver Open Jump Rings 4mm 21 Gauge (20)
You will need 1 package(s).
1 package = 20 Pieces.
$4.59 / Package | SKU: FJR-03046
Antiqued Silver Plated Ornate Filigree Diamond Connector Links 21mm (4)
You will need 1 package(s).
1 package = 4 Pieces.
$2.99 / Package | SKU: FCO-7007
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
You will need 1 package(s).
1 package = 1 Piece.
$1.89 / Package | SKU: XTL-1054
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Featured New Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed