Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
- Cut your gold scalloped bar chain so that it is 18 links long. Next, cut two lengths of your gold krinkle chain, 3 inches long each.
- Please watch the video: How to Wire Wrap a Briolette. Cut a 3 inch length of 24 gauge gold craft wire and wire wrap an Austrian crystal ruby briolette. Snip off excess wire with flush cutters. Create a total of 9 of these.
- Open a 3mm gold jump ring and link it to one of the wrapped briolettes and also the middle ring between the 9th and 10th scalloped bar chain link on your cut piece. Repeat this with all of your briolettes, connecting them to every other middle ring on your scalloped bar chain starting from the middle (where you just hung a briolette) and working outwards on both sides of the necklace. See photo.
- Open another 3mm jump ring and connect it to the end scallop bar on one side of your necklace and the end chain link on one of your cut krinkle chain lengths. Close the jump ring. Repeat this on the other side of the necklace.
- Open a 6mm jump ring and connect it to the end chain link of your krinkle chain (one of the krinkle chain ends is quite narrow, just slip it through the part of the link that it will fit into). Close the jump ring.
- Go to the other side of your necklace and repeat the previous step but also slip onto the jump ring your lobster clasp with the heart detailing. Close the jump ring.
- All done! Enjoy your pretty new necklace.
WHAT YOU'LL NEED: (scroll down for purchase options)
- CHA-98831 - Bright Gold Plated Teardrop Krinkle Chain 2mm Bulk By The Foot
Project uses 6 inches. You will need 1 package.
- CHA-98852 - Bright Gold Plated Curved 12.5mm Bar Scalloped Chain Sold By The Foot
Project uses 10 inches. You will need 1 package.
- SWC-4387 - Austrian Crystal, 6012 Briolette Pendants 11x10mm, 2 Pieces, Ruby
Project uses 9 pieces. You will need 5 packages.
- WNT-2433 - Beadsmith Tarnish Resistant Gold Color Copper Wire 24 Gauge 30 Yards (27.4 Meters)
Project uses 27 inches. You will need 1 package.
- FJR-5260 - 22K Gold Plated 6mm 19 Gauge Open Jump Rings (100)
Project uses 2 pieces. You will need 1 package.
- FJR-5230 - 22K Gold Plated Open Jump Rings 3mm 22 Gauge (x100)
Project uses 11 pieces. You will need 1 package.
- FCL-2546 - 22K Gold-Plated Sterling Silver Lobster Clasp With Heart Detail 11.5mm (1)
Project uses 1 piece. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
- XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
- XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose