Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
These instructions will make a 7 inch bracelet. For a longer or shorter bracelet, adjust the lengths of chain used on either side respectively. You can use an awl to widen the links of your beaded cable chain to fit onto the jump rings.
- You may want to start by watching the video: How to Properly Cut Gemstone Chain. This video offers helpful tips for cutting your beaded cable chain links for this project.
- Use flush cutters to cut six 2.75 inch lengths of beaded cable chain. Note: loose beads will come off of your chain as you cut the links, so measure an extra link or two to account for the loss of length when this happens.
- To attach the chain lengths from step 2 onto your Zola Elements clustered quartz focal: Use pliers to open a 4mm jump ring and slide on the end links of three of your chain lengths. Also slide on the loop on one side of the focal link. Close the jump ring. Repeat this step to attach three chains to the opposite side of the focal link.
- To attach your clasp: Open a jump ring and slide on the opposite end link on one of your chain lengths. Also slide on one of the loops of the three strand magnetic clasp. Close the jump ring. Repeat this process to attach the remaining two chains to this side of the clasp.
- Repeat step 4 to attach the other side of your clasp. Enjoy your bracelet!
WHAT YOU'LL NEED: (scroll down for purchase options)
- PZE-031 - Zola Elements Pendant Link, Clustered Quartz Point Stick 27.5mm, 1 Piece, Antiqued Silver Tone
Project uses 1 piece. You will need 1 package.
- CHA-0267 - Zola Elements Bulk Chain, Beaded Cable Links 2x3mm, By the Foot, Gold Tone / Riviera Mix
Project uses 18 inches. You will need 2 packages.
- FJR-5140 - Silver Plated Open Jump Rings 4mm 21 Gauge Thick (100)
Project uses 8 pieces. You will need 1 package.
- FCL-0719 - Magnetic Clasp, 3-Strand Rectangle 8x8.5mm, 1 Set, Antiqued Silver Plated
Project uses 1 piece. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece
- XTL-0034 - Wubbers Classic Series Round Nose Quality Jeweller's Pliers
- XTL-0020 - Baby Wubbers Quality Fine Chain Nose Jeweller's Pliers
- XTL-4003 - Beadsmith Bead And Pearl Knotting Fine Point Steel Awl