Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
You can choose the length of your necklace by adjusting the amount of chain you cut for it in step 5; it can be up to 24 inches long.
- Add a 4mm Majestic Green bicone to a head pin and make a wrapped loop at the top of the bead. Repeat once.
- Add a 4mm Iridescent Rouge pearl to a head pin and make a wrapped loop at the top of the bead. Repeat three times.
- Add a 3mm Iridescent Rouge pearl and a 6mm Majestic Green bicone to a head pin and make a wrapped loop at the top of the beads. Repeat once.
- Add a 4mm Majestic Green faceted round to a head pin and make a wrapped loop at the top of the bead. Repeat once.
- Add the teardrop pendant to the center link of a 20-inch chain using a round jump ring.
- Attach the 4mm Majestic Green faceted round dangle two links over from the center teardrop using an oval jump ring.
- Attach a 4mm Iridescent Rouge pearl dangle one link over from the last dangle using an oval jump ring.
- Attach the Iridescent Rouge pearl and Majestic Green bicone dangle three links over from the last dangle using an oval jump ring.
- Attach a 4mm Iridescent Rouge pearl dangle two links over from the last dangle using an oval jump ring.
- Attach the 4mm Majestic Green bicone dangle one link over from the last dangle using an oval jump ring.
- Repeat steps 6-10 on the other side of the teardrop pendant.
- Attach the clasp to one end of the chain using a jump ring. Attach a jump ring to the other end of the chain.
- For the earrings, add a 3mm Iridescent Rouge pearl, a 6mm Majestic Green bicone, a 4mm Majestic Green bicone, and a 3mm Iridescent Rouge pearl to an eye pin and make a wrapped loop.
- Attach a Scarlet Trilliant pendant to the bottom of the eye pin using a round jump ring.
- Attach the earwire to the wrapped loop at the top of the eye pin.
- Repeat steps 13-15 to make the other earring.
WHAT YOU'LL NEED: (scroll down for purchase options)
- FHP-5215 - Head Pins, 1.5 Inches Long and 22 Gauge Thick, 22K Gold Plated (50 Pieces)
Project uses 10 piece(s). You will need 1 package(s).
- FCL-324 - Lobster Clasp, Oval with Ring 9x4.8mm, 14k Gold-Filled (1 Set)
Project uses 1 piece(s). You will need 1 package(s).
- FJR-3916 - 22K Gold Plated Open Jump Rings Oval 4x6mm 20 Gauge (50 pcs)
Project uses 10 piece(s). You will need 1 package(s).
- FJR-5465 - 22K Gold Plated Open Jump Rings 6mm 21 Gauge (50 pcs)
Project uses 5 piece(s). You will need 1 package(s).
- FHP-6250 - Open Eye Pins, 50 Pieces, 22K Gold Plated (1 Inch Long and 21 Gauge Thick)
Project uses 2 piece(s). You will need 1 package(s).
- FEA-3082 - Earring Findings, French Ear Wire Hook 16mm, Gold Plated (50 Pcs)
Project uses 1 pair. You will need 1 package(s).
- PRES-6000-SCLT11 - PRESTIGE Crystal, #6000 Teardrop Pendant 11x5.5mm, Scarlet (1 Piece)
Project uses 1 piece(s). You will need 1 package(s).
- PRES-5810-CRGE3 - PRESTIGE Crystal, #5810 Round Pearl Bead 3mm, Iridescent Rouge (1 Piece)
Project uses 6 piece(s). You will need 6 package(s).
- PRES-5810-CRGE4 - PRESTIGE Crystal, #5810 Round Pearl Bead 4mm, Iridescent Rouge (1 Piece)
Project uses 4 piece(s). You will need 4 package(s).
- PRES-6434-SCLT8 - PRESTIGE Crystal, #6434 Trilliant Cut Pendant 8mm, Scarlet, (1 Piece)
Project uses 2 piece(s). You will need 2 package(s).
- PRES-5000-MAG4 - PRESTIGE Crystal, #5000 Round Bead 4mm, Majestic Green (1 Piece)
Project uses 2 piece(s). You will need 2 package(s).
- PRES-5328-MAG4 - PRESTIGE Crystal, #5328 Bicone Bead 4mm, Majestic Green (1 Piece)
Project uses 4 piece(s). You will need 4 package(s).
- PRES-5328-MAG6 - PRESTIGE Crystal, #5328 Bicone Bead 6mm, Majestic Green (1 Piece)
Project uses 4 piece(s). You will need 4 package(s).
- CHA-9810 - Nunn Design Antiqued Gold Plated Flat Cable Chain, 3.6mm, by The Foot
Project uses 2 feet. You will need 2 package(s).
RECOMMENDED TOOLS:- XTL-0021 - Baby Wubbers Quality Fine Round Nose Jeweller's Pliers
- XTL-5450 - Xuron Jeweler's Super Fine Pliers Chain Nose Flat Nose
- XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire (1 Piece)
- XTL-0020 - Baby Wubbers Quality Fine Chain Nose Jeweller's Pliers
For closed captions/subtitles, click the CC icon on the video player after starting the video.
Earn Reward Points with your purchase of project components or tools.
