Retired - Lover's Flame Bracelet

Name: Retired - Lover's Flame Bracelet
Brand: Beadaholique
SKU: B2392
Availability: OutOfStock

PROJECT B2392

Designer: Kat Silvia

Skill Level: Intermediate

Save to Wishlist

Printer Friendly PDF
(if available)

This sweet rosy bracelet is complete with bead caps and a crystal flame pendant from TierraCast.

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

This bracelet measures approximately 7 inches. To modify the length, simply adjust the number of beads strung or length of chain respectively.

Open one jump ring and attach it to the flame charm. Close the jump ring.
Cut off 8 inches of beading wire and attach a bead stopper about two inches from one end.
String on the beads in the following order: 1 bead cap, 1 bead, 2 bead caps, 1 bead, 2 bead caps, 1 bead, 2 bead caps, 1 bead, 2 bead caps, 1 bead, 1 bead cap, 1 jump ring with flame charm. Now reverse the pattern to mirror this on the second half of the bracelet.
String on one crimp tube. Thread the wire through a thread protector and back down into the crimp tube and pull snug. Crimp the crimp tube. Thread the wire back through a few adjacent beads. Trim any excess wire. Add a crimp cover.
Move to the beginning side of the bracelet and remove the bead stopper. Repeat the above step on this side. Before stringing the wire back through the crimp tube, string on one lobster clasp to the wire protector.
Take one head pin and string on one bead, make a wrapped wire loop. Set aside.
Open one link of the chain, same as you would a jump ring, and attach it to the wire protector on the first side of the bracelet. Determine how long you want this chain extender to be and attach the wrapped wire loop to the final link in the chain by opening the link of chain.

WHAT YOU'LL NEED: (scroll down for purchase options)

BCP-3633 - Czech Fire Polished Glass Beads 6mm Round 'Rose Pink Matte AB' (25)
Project uses 11 pieces. You will need 1 package.

PND-178 - TierraCast Pewter Frame Pendant, Flame Design with Crystal 19x9.5mm, 1 Piece, Rhodium Plated
Project uses 1 piece. You will need 1 package.

BMB-3830 - TierraCast Rhodium Plated Pewter 'Beaded' Bead Caps 4mm (20)
Project uses 18 pieces. You will need 1 package.

FCR-4160 - Silver Plated Wire & Thread Protectors .019 Inch Loops (50)
Project uses 2 pieces. You will need 1 package.

FCL-7522 - Nunn Design Antiqued Silver Plated Lobster Clasps 12mm (2)
Project uses 1 piece. You will need 1 package.

FJR-3911 - Silver Plated Open Jump Rings 4mm 20 Gauge (50)
Project uses 1 piece. You will need 1 package.

FHP-5320 - Silver Plated Head Pins 2 Inches Long/22 Gauge (X50)
Project uses 1 piece. You will need 1 package.

FCR-1053 - Shiny Silver Tone Crimp Bead Covers 3mm (x144)
Project uses 2 pieces. You will need 1 package.

FCR-1215 - Beadalon Silver Plated Crimp Tubes 2x1.8mm 1.3mm ID (75 Beads)
Project uses 2 pieces. You will need 1 package.

CHA-9805 - Nunn Design Antiqued Silver Plated Textured Cable Chain, 4mm, by the Foot
Project uses 2 Inches. You will need 1 package.

XCR-5193 - Soft Flex, 49 Strand Medium Beading Wire .019 Inch Thick, 30 Feet, Satin Silver
Project uses 8 Inches. You will need 1 package.

RECOMMENDED TOOLS:

XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece
XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
XTL-5608 - Xuron 4 In 1 Crimping Pliers - Works On 1, 2 And 3mm Crimps!
XTL-3000 - Bead Stopper- Stop Beads Sliding Off Stringing Material
XTL-9920 - Beadaholique Bead Mat, 12.5x9.25 Inches, 1 Piece

Additional Information

Theme	Valentine's Day, Mother's Day
Ingredients	PND-178, BMB-3830, FCR-4160, FCL-7522, FJR-3911, FHP-5320, FCR-1053, FCR-1215, CHA-9805, XCR-5193,

Useful Techniques & Learning Guides

How to Make a Wrapped Wire Loop
How to Open and Close a Jump Ring
How to Use Crimp Beads
Standard Necklace and Bracelet Lengths
Stringing 101: Bead Stringing Basics

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.

            
You will need 1 package(s).
1 package = .

             / Package | SKU: PND-178

            
You will need 1 package(s).
1 package = .

             / Package | SKU: BMB-3830

Wire & Thread Protectors, .019 Inch Loops Silver Plated (50 Pieces)

            Wire & Thread Protectors, .019 Inch Loops Silver Plated (50 Pieces)
        
You will need 1 package(s).
1 package = 50 Pieces.

                $2.89
            
             / Package | SKU: FCR-4160

Nunn Design Lobster Clasps, Curve 12mm, Antiqued Silver Plated (2 Pieces)

            Nunn Design Lobster Clasps, Curve 12mm, Antiqued Silver Plated (2 Pieces)
        
You will need 1 package(s).
1 package = 2 Pieces.

                $2.59
            
             / Package | SKU: FCL-7522

Silver Plated Open Jump Rings 4mm 20 Gauge (50 pcs)

            Silver Plated Open Jump Rings 4mm 20 Gauge (50 pcs)
        
You will need 1 package(s).
1 package = 50 Pieces.

                $2.25
            
             / Package | SKU: FJR-3911

Head Pins, 2 Inches Long and 22 Gauge Thick, Silver Plated (50 Pieces)

            Head Pins, 2 Inches Long and 22 Gauge Thick, Silver Plated (50 Pieces)
        
You will need 1 package(s).
1 package = 50 Pieces.

                $3.49
            
             / Package | SKU: FHP-5320

Crimp Bead Covers, 3mm, Silver Tone (144 Pieces)

            Crimp Bead Covers, 3mm, Silver Tone (144 Pieces)
        
You will need 1 package(s).
1 package = 144 Pieces.

                $5.59
            
             / Package | SKU: FCR-1053

Sold out

Beadalon Crimp Beads, Tube 2x1.8mm, Silver Plated (75 Pieces)

            Beadalon Crimp Beads, Tube 2x1.8mm, Silver Plated (75 Pieces)
        
You will need 1 package(s).
1 package = 75 Pieces.

                $3.75
            
             / Package | SKU: FCR-1215

Nunn Design Antiqued Silver Plated Textured Cable Chain, 4mm, by the Foot

            Nunn Design Antiqued Silver Plated Textured Cable Chain, 4mm, by the Foot
        
You will need 1 package(s).
1 package = By the Foot.

                $6.29
            
             / Package | SKU: CHA-9805

Sold out

Soft Flex, 49 Strand Medium Beading Wire .019 Inch Thick, Satin Silver (30 Feet)

            Soft Flex, 49 Strand Medium Beading Wire .019 Inch Thick, Satin Silver (30 Feet)
        
You will need 1 package(s).
1 package = 1 Spool.

                $19.99
            
             / Package | SKU: XCR-5193