Retired - Karlie Necklace

PROJECT N2068
Designer: Kat Silvia
Skill Level: Intermediate
This chic necklace highlights the brilliance of the Austrian crystal Baguette Fancy Stones. By alternating Jet and Crystal stones, this necklace has a 'goes with everything quality'.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

Before beginning this project, please watch our video: How to Use Crystal Clay.
  1. From what you learned in the video, mix a small amount of part A and the same size amount of part B until there is no more marbling.
  2. Place the clay into the bezel.
  3. Begin placing the baguette stones into the clay, starting with jet and alternating with crystal. They will be snug. The edge of the stones will be flush with the rim of the bezel finding.
  4. Clean up any clay that may have spilled over.
  5. Cut off 22 inches of chain.
  6. Open one jump ring and attach it to the loop on the bezel. Close the jump ring.
  7. Thread the chain through the jump ring.
  8. To one end of the chain, open one jump ring and attach it to the last link of the chain. Close the jump ring.
  9. To the other end of the chain, open one jump ring and attach it to the last link of the chain and one lobster clasp. Close the jump ring.
  10. All done!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • SWCR-4221 - Austrian Crystal, 4501 Baguette Fancy Stone 10x5mm, 2 Pieces, Crystal F
    Project uses 3 pieces. You will need 2 packages.

  • SWCR-4223 - Austrian Crystal, 4501 Baguette Fancy Stone 10x5mm, 2 Pieces, Jet
    Project uses 4 pieces. You will need 2 packages.

  • FCL-2513 - Beautiful Silver Plated Curved Lobster Clasps 10mm (10)
    Project uses 1 piece. You will need 1 package.

  • PND-7560 - Amate Studio Silver Plated Fancy Raised Rectangl Bezel Pendant 20.5x52.5mm (1)
    Project uses 1 piece. You will need 1 package.

  • FJR-5168 - Silver Plated Open Jump Rings 6mm 18 Gauge (50)
    Project uses 3 pieces. You will need 1 package.

  • TRC-230 - Crystal Clay 2-Part Epoxy Clay Kit 'Black' 25 Grams
    Project uses 1 piece. You will need 1 package.

  • CHA-98962 - Silver Plated Rectangular Box Chain - 5.5 x 3.2mm - Sold By The Foot
    Project uses 22 Inches. You will need 2 packages.

RECOMMENDED TOOLS:
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
Additional Information
Ingredients FCL-2513, FJR-5168, TRC-230, CHA-98962,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Lobster Clasps, Curved 12.5mm, Silver Plated (10 Pieces)
You will need 1 package(s).
1 package = 10 Pieces.
$8.29 / Package | SKU: FCL-2513
Silver Plated Open Jump Rings 6mm 18 Gauge (50 pcs)
You will need 1 package(s).
1 package = 50 Pieces.
$5.99 / Package | SKU: FJR-5168
You will need 1 package(s).
1 package = .
/ Package | SKU: TRC-230
Silver Plated Rectangular Box Chain, 3.2mm Links, by the Foot
You will need 2 package(s).
1 package = By the Foot.
$4.05 / Package | SKU: CHA-98962
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jewelry Fine Round Nose Micro Pliers
$6.29 / Package | SKU: XTL-5514
The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed