Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
By following the instructions below, you will make one earring. Repeat all instructions to make the second earring. You will need a paint brush & some paper towels for this project.
- Watch the video: How to Use Vintaj Patinas and Glaze. In this video you will learn how to mix colors and create opaque finishes or create washes.
- Begin by placing a wood bead onto a paper towel. Get your Vintaj patina and paint brush ready. Add a few dabs of Vintaj patina onto your paper towel, and carefully paint the bottom half of your wood bead. Apply as many coats as you need, waiting for each to dry in between. Set aside to fully dry.
- Next, using your copper Krylon leafing pen, carefully draw a line across the wood bead at the center point, where your blue patina ends. Also paint the border of the wood bead that is surrounding the blue patinated portion. See photo for reference.
- Using your hypo cement glue, apply a thin line of glue diagonally across the wood bead. Please see photo. Carefully place your gold plated arrow embellishment onto the glue. Dry in place.
- Next, using your chain nose pliers, open an antiqued brass jump ring. Slide it through the hole on the wood bead and close. Open another jump ring and attach it onto that first jump ring and close.
- Open your antiqued brass earring hook and slide it through that second jump ring and close.
- You're done!
WHAT YOU'LL NEED: (scroll down for purchase options)
- BWD-0418 - Smooth Wood Pendant, Flat Round Disc with 25mm Diameter, 6 Pieces, Light Brown
Project uses 2 pieces. You will need 1 package.
- FEA-6713 - Antiqued Brass Earring Hooks Kidney Wires 47mm (10 Pairs)
Project uses 1 pair. You will need 1 package.
- XTL-1001 - G S Hypo Cement Precise Applicator Essential!
Project uses 1 piece. You will need 1 package.
- PND-0979 - Nunn Design Brass Stamping, 6.5x22.5mm Small Arrow, 2 Pieces, Brass
Project uses 2 pieces. You will need 1 package.
- XTL-1183 - Krylon Acid-Free Leafing Pen - For Metallic Highlights - Copper (1 Pen)
Project uses 1 piece. You will need 1 package.
- FJR-5472 - Antiqued Brass Open Jump Rings 6mm 20 Gauge (x100)
Project uses 4 pieces. You will need 1 package.
- XTL-9066 - Vintaj Patina Opaque Permanent Ink - Marine Blue - 0.5 Ounce Bottle
Project uses 1 piece. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose