Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

By following the instructions below, you will make one earring. Repeat all instructions to make the second earring.
  1. Place a dab of E6000 glue onto the back of a hummingbird cameo and press it into place in an antique silver plated bezel pendant. Allow the glue to set for about twenty minutes before continuing.
  2. Clip the tip (head end) off of an antique silver plated head pin. Create a simple wire loop at one end to create an eye pin.
  3. Place a cyclamen opal bicone bead onto the eye pin. Create a simple wire loop after the loop. Rotate your two loops on the link so that they are perpendicular to each other.
  4. Open one of the loops on your bicone link that you created and place the bezel pendant onto the loop; close the loop.
  5. Open the other loop on your bicone link and connect it to an antique silver plated earring hook; close the loop.
  6. Allow the glue to dry thoroughly before wearing.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • FHP-6351 - Antiqued Silver Plated Head Pins 2 Inches Long/22 Gauge (50)
    Project uses 2 pieces. You will need 1 package.

  • PND-5753 - Antiqued Silver Plated 18x13mm Etched Texture Oval Bezel Pendants (2)
    Project uses 2 pieces. You will need 1 package.

  • SWBI-14126 - Austrian Crystal, 5328 Bicone Beads 4mm, 24 Pieces, Cyclamen Opal
    Project uses 2 pieces. You will need 1 package.

  • SPCB-398 - Vintage Style Lucite Oval Cameos Purple With Ivory Hummingbirds 18x13mm (4)
    Project uses 2 pieces. You will need 1 package.

  • FEA-3091 - Antiqued Silver Plated Plated Fish Hook Earring Hooks (50)
    Project uses 2 pieces. You will need 1 package.

  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 tube. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
Additional Information
Ingredients FHP-6351, FEA-3091, XTL-1054,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Head Pins, 2 Inches Long and 22 Gauge Thick, Antiqued Silver Plated (50 Pieces)
You will need 1 package(s).
1 package = 50 Pieces.
$5.99 / Package | SKU: FHP-6351
Earring Findings, Fish Hook Ear Wire 15x15mm, Antiqued Silver Plated (25 Pairs)
You will need 1 package(s).
1 package = 25 Pairs.
$5.59 / Package | SKU: FEA-3091
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
You will need 1 package(s).
1 package = 1 Piece.
$2.19 / Package | SKU: XTL-1054
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
The Beadsmith Jewelry Fine Round Nose Micro Pliers
$6.49 / Package | SKU: XTL-5514

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed