Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
This necklace extends from 25 inches to 27 inches when including the chain extender. To modify the length, simply adjust the length of chain on both sides respectively.
- Begin by cutting the sequin chain into two lengths, 6 inches each. Set these aside.
- Cut a length of beading wire that is 16 inches. Place a bead stopper about 2 inches from one end.
- Next, string on the beads in the following order: one gold nugget, one sea glass spacer, repeat 6 more times and end with one more gold nugget. Then string seven howlite beads, one gold nugget, eleven pink wood beads, one gold nugget, seven howlite beads, one gold nugget, one sea glass spacer. Then repeat the gold nugget and sea glass segment 6 more times and end with one more gold nugget.
- String on one crimp tube. Thread the wire up and over the wire protector and back down. Before stringing it back through the crimp tube, you will slip one end of the sequin chain onto the wire protector. Slip it through one hole of one sequin. Now thread the wire through the crimp tube. Pull snug and crimp the crimp tube. Thread the wire back through a few adjacent beads. Trim any excess wire. Add a crimp cover.
- Move to the beginning side of the necklace and remove the bead stopper. Repeat the above step on this side of the necklace.
- Open one jump ring and to one end of the sequin chain, attach one lobster clasp. Close the jump ring.
- Move to the other side of the necklace and open another jump ring. Attach it to the end of the sequin chain, and to one chain extender. Close the jump ring.
WHAT YOU'LL NEED: (scroll down for purchase options)
- BWD-1039 - EuroWood Natural Wood Beads, Round 12mm Diameter, 25 Pieces, Pink
Project uses 11 pieces. You will need 1 package.
- BGL-10221 - Cultured Sea Glass, Button Heishi Spacer Beads 9mm, 36 Pieces, Aqua Blue
Project uses 14 pieces. You will need 1 package.
- SPHO-102 - Dakota Stones Gemstone Beads, White Howlite, Round 6mm, 8 Inch Strand
Project uses 14 pieces. You will need 1 package.
- BMB-9827 - TierraCast 22K Gold Plated Pewter Nugget Heishe Spacer Beads 7mm (12)
Project uses 18 pieces. You will need 2 packages.
- FJR-9117 - TierraCast Pewter, Small Open Jump Rings 5.4mm, 50 Pieces, 22K Gold Plated
Project uses 2 pieces. You will need 1 package.
- FCL-4720 - 22K Gold Plated Curved Lobster Clasps 10mm (6)
Project uses 1 piece. You will need 1 package.
- FCR-1711 - BeadSmith Crimp Tubes, 1.5x1.5mm, 100 Pieces, Gold Plated
Project uses 2 pieces. You will need 1 package.
- FCR-4161 - 22K Gold Plated Wire & Thread Protectors .019 Inch Loops (50)
Project uses 2 pieces. You will need 1 package.
- FCR-1056 - Bright Gold Tone Crimp Bead Covers 3mm (144)
Project uses 2 pieces. You will need 1 package.
- XCR-67893 - Beadalon Wire Gold Color 7 Strand Medium .018 Inch / 30Ft
Project uses 16 inches. You will need 1 package.
- CHA-0171 - Bulk Chain, with 6mm Round Sequin Connector Links, Sold By The Foot, Gold Plated
Project uses 1 Foot. You will need 1 package.
- AXC-91002 - Bright Gold Plated 5mm Chain Necklace Extender W/ Drop 2 Inch (5)
Project uses 1 piece. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece
- XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
- XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
- XTL-5608 - Xuron 4 In 1 Crimping Pliers - Works On 1, 2 And 3mm Crimps!
- XTL-3000 - Bead Stopper- Stop Beads Sliding Off Stringing Material