Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
- Before beginning this project, please watch our video: how to use Crystal Clay.
- To see how to create this cuff bracelet, please watch the video: how to embed wire and rhinestone cup chain into Crystal Clay and make a cuff bracelet by Becky Nunn. In the video you will learn how to texturize and cut your wire "reeds," cut rhinestone cup chain, and mold Crystal Clay into a Nunn Design channel cuff bracelet. You will also learn how to embed wire and cup chain pieces into Crystal Clay.
- When your bracelet is finished, let the clay cure 14 to 16 hours, or overnight.
- Enjoy your bracelet!
WHAT YOU'LL NEED: (scroll down for purchase options)
- JB-2676 - Nunn Design Antiqued Silver Plated Channel Cuff Bracelet - 2 1/2 Inch
Project uses 1 piece. You will need 1 package.
- WCR-2033 - Artistic Wire, Copper Craft Wire 20 Gauge Thick, 6 Yard Spool, Tarnish Resistant Brass
Project uses 12 inches. You will need 1 package.
- CHA-10109 - Czech Crystal Brass Rhinestone Cup Chain 24PP Crystal (By The Foot)
Project uses 1 inch. You will need 1 package.
- TRC-230 - Crystal Clay 2-Part Epoxy Clay Kit 'Black' 25 Grams
Project uses 1 piece. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
- XTL-0277 - ImpressArt Brass Hammer For Metal Stamping - 1 Pound - 1 Piece
- XTL-0250 - Eurotool Bench Block Helper - Rubber Base With Interchangeable Steel And Nylon Blocks