Retired - Gallery Earrings

Name: Retired - Gallery Earrings
Brand: Beadaholique
SKU: E722
Availability: OutOfStock

PROJECT E722

Designer: Julie Bean

Skill Level: Beginner

Save to Wishlist

Printer Friendly PDF
(if available)

These pretty and petite earrings would make a lovely addition to your jewelry wardrobe. They can easily be dressed up or down and are so easy to make that you will want to make a pair in every color.

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

Place onto a head pin 1 round bead frame with an 8mm Austrian crystal round bead in emerald inside it, and 1 3mm Austrian crystal bicone bead in emerald.
Create a simple wire loop using wire looping pliers after the last bead.
Open the simple loop you just created and link it to the loop at the base of your stud earring post with ball. Close the loop back up.
Place an earnut on the backside of your post earring.
Enjoy!

WHAT YOU'LL NEED: (scroll down for purchase options)

SWC-0850 - Austrian Crystal, 5000 Round Beads 8mm, 8 Pieces, Emerald
Project uses 2 pieces. You will need 1 package.

BMB-3675 - TierraCast 22K Gold Plated Pewter Round 14mm Bead Frame Fits Austrian crystal (2)
Project uses 2 pieces. You will need 1 package.

SWBB-1350 - Austrian Crystal, 5328 Bicone Beads 3mm, 25 Pieces, Emerald
Project uses 2 pieces. You will need 1 package.

FEA-1048 - 22K Gold Plated Stud Earrings Ball Post & Ring 4mm (20)
Project uses 1 pair. You will need 1 package.

FEA-1015 - 22K Gold Plated Earring Backs (Earnuts) Med. (100)
Project uses 2 pieces. You will need 1 package.

FHP-5215 - 22K Gold Plated Head Pins - 22 Gauge/1.5 Inches (50)
Project uses 2 pieces. You will need 1 package.

RECOMMENDED TOOLS:

XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
XTL-5032 - Beadsmith Wire Looping Pliers - Concave And Round Nose
XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex

Additional Information

Theme	St. Patrick's Day
Ingredients	FEA-1048, FEA-1015, FHP-5215,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.

Earring Posts, Stud with Ball 4mm, Gold Plated (10 Pairs)

            Earring Posts, Stud with Ball 4mm, Gold Plated (10 Pairs)
        
You will need 1 package(s).
1 package = 10 Pairs.

                $7.19
            
             / Package | SKU: FEA-1048

Earring Backs, Medium Clutch 6mm, 22K Gold Plated (12 Pieces)

            Earring Backs, Medium Clutch 6mm, 22K Gold Plated (12 Pieces)
        
You will need 1 package(s).
1 package = 12 Pieces.

                $1.49
            
             / Package | SKU: FEA-1015

Head Pins, 1.5 Inches Long and 22 Gauge Thick, 22K Gold Plated (50 Pieces)

            Head Pins, 1.5 Inches Long and 22 Gauge Thick, 22K Gold Plated (50 Pieces)
        
You will need 1 package(s).
1 package = 50 Pieces.

                $4.27
            
             / Package | SKU: FHP-5215