Retired - Flower Power Necklace in Daybreak

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Paint your 19mm Vintaj petal stamping using Vintaj patina in pink quartz. Paint your 34mm Vintaj petal stamping using Vintaj patina in verdigris teal. Let both of these stampings dry and then paint a second coat of patina on each. Let dry.
2. Please watch the video: How to Use Beadsmith's EZ-Rivet Tool.
3. Based upon what you learned in the video, rivet your two petal stampings to a Vintaj Artisan Copper 35mm round stamping blank using a 1/8" hollow rivet.
4. Open a 4mm jump ring and connect this to the hole at the top of your copper stamping blank from the previous step. Close the jump ring.
5. Cut an 18 inch length of antique copper plated textured cable chain.
6. Thread one end of the cut chain through the jump ring attached to your pendant.
7. Open a 6mm antique copper plated jump ring and link this to one end of your chain. Close the jump ring.
8. Open a 4mm jump ring and link this to the other end of your chain. Also place onto the jump ring your small lobster clasp. Close the jump ring.
9. Enjoy!

• CHA-9653 - Antiqued Copper Plated Textured Cable Chain 2.3mm Bulk By The Foot
  Project uses 18 inches. You will need 2 packages.


• FJR-3086 - Antiqued Copper Plated Open Jump Rings 4mm 21 Gauge (50)
  Project uses 2 pieces. You will need 1 package.


• FCL-2526 - Antiqued Copper Plated Sleek Lobster Claw Clasps 10mm (6)
  Project uses 1 clasp. You will need 1 package.


• PND-7464 - Vintaj Artisan Copper Blank Circle Blank Pendant 35mm (2)
  Project uses 1 piece. You will need 1 package.


• PND-7132 - Vintaj Natural Brass 6 Petal Cut Out Flower Stamping Findings 19mm (2)
  Project uses 1 piece. You will need 1 package.


• PND-7133 - Vintaj Natural Brass 8 Petal Cut Out Flower Stamping Findings 34mm (2)
  Project uses 1 piece. You will need 1 package.


• FJR-3093 - Antiqued Copper Plated Open Jump Rings 6mm 20 Gauge (50)
  Project uses 1 piece. You will need 1 package.


• FCO-9915 - Beadsmith Metal Elements Copper 1/8 Inch Hollow Rivets 1/16 Inch Diameter (100)
  Project uses 1 piece. You will need 1 package.


• XTL-9070 - Vintaj Patina Opaque Permanent Ink - Pink Quartz - 0.5 Ounce Bottle
  Project uses 1 bottle. You will need 1 package.


• XTL-9073 - Vintaj Patina Opaque Permanent Ink - Verdigris Teal - 0.5 Ounce Bottle
  Project uses 1 bottle. You will need 1 package.

• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
• XTL-0094 - Beadsmith EZ-Rivet Piercing And Setting Tool - 1/16 Set (1 Tool)