Retired - Elsa Earrings

Name: Retired - Elsa Earrings
Brand: Beadaholique
SKU: E743
Availability: OutOfStock

PROJECT E743

Designer: Julie Bean

Skill Level: Beginner

Save to Wishlist

Printer Friendly PDF
(if available)

The ornate oak leaf charm chain used in this design has wonderful movement and shape to it. The design is simple to make but looks more complex because of the multitude of delicate charm dangles and the striking Czech glass focal bead at the base.

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

By following the instructions below, you will make one earring. Repeat all instructions to make the second earring.

Place onto a head pin 1 Czech glass table cut window bead in turquoise. Create a simple wire loop after the bead.
Cut a 1.5" length of copper charm chain (9 links). When you cut this length, several charms will fall off. Keep these charms for use in a following steps.
Onto the last chain link, attach the bead with simple wire loop from the first step.
Open the loop at the base of your earring hook (the same way you would open a jump ring). Link onto this open loop one of the charms that came off when you cut your chain and the chain piece from above with the dangle at the bottom. Close this loop back up.
All done! Enjoy.

WHAT YOU'LL NEED: (scroll down for purchase options)

FHP-1048 - Genuine Antiqued Copper Head Pins 22 Gauge 2 Inches (24)
Project uses 2 pieces. You will need 1 package.

FEA-3018 - Genuine Antiqued Copper Fish Hook Earring Hooks 16mm (24)
Project uses 1 pair. You will need 1 package.

RECOMMENDED TOOLS:

XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex

Additional Information

Theme	Summer, Boho, Autumn
Ingredients	FHP-1048, FEA-3018,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.

Head Pins, 2 Inches Long and 22 Gauge Thick Antiqued Copper (24 Pieces)

            Head Pins, 2 Inches Long and 22 Gauge Thick Antiqued Copper (24 Pieces)
        
You will need 1 package(s).
1 package = 24 Pieces.

                $3.39
            
             / Package | SKU: FHP-1048

Genuine Antiqued Copper Fish Hook Earring Hooks 16mm (24 Pieces)

            Genuine Antiqued Copper Fish Hook Earring Hooks 16mm (24 Pieces)
        
You will need 1 package(s).
1 package = .

                $4.99
            
             / Package | SKU: FEA-3018