Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
This necklace measures approximately 16 inches. To modify the length, simply adjust the number of beads strung respectively.
- Begin by cutting a length of beading wire that is 20 inches in length. Place a bead stopper about two inches from one end.
- Then string the beads on in the following order: 1 white pearl, 1 gold bead, and 1 colorful pearl.
- Next string: 1 gold bead, 1 white pearl, 1 crystal, 1 white pearl, 1 gold bead, and 1 colorful pearl. Repeat this step's pattern until you have added 12 units with crystals.
- After your last crystal add: 1 white pearl, 1 gold bead, 1 colorful pearl, 1 gold bead, and 1 white pearl.
- String on one crimp tube. String one closed jump ring. Thread the beading wire back through the crimp tube and pull snug. Crimp the crimp tube. Trim any excess wire. Add a crimp cover.
- Move to the beginning side of the necklace and remove the bead stopper. Repeat the above step on this side of the necklace, attaching the loop of the lobster clasp on this side in place of the closed jump ring.
For additional design tips please watch our video: Tips for Creating a Strung Pearl Necklace.
WHAT YOU'LL NEED: (scroll down for purchase options)
- BMB-5063 - 22K Gold Plated 4mm Round Metal Beads (50)
Project uses 26 pieces. You will need 1 package.
- PEX-17 - Dark Multi Color And Shaped Cultured Nugget Pearl Mix 6-12mm (16 Inch Strand)
Project uses 39 pieces. You will need 1 package.
- SWCR-5207 - Austrian Crystal, 5045 Rondelle Beads 6mm, 6 Pieces, Crystal
Project uses 12 pieces. You will need 2 packages.
- FCR-9018 - Jewelry Findings, Crimp Bead Covers 4mm, 50 Pieces, Gold Plated
Project uses 2 pieces. You will need 1 package.
- FJR-07015 - Jump Rings, Closed 6mm Diameter 18 Gauge, 20 Pieces, Gold Plated
Project uses 1 piece. You will need 1 package.
- FCR-9007 - Jewelry Findings, Tube Crimp Bead 2x2mm, 100 Pieces, Gold Plated
Project uses 2 pieces. You will need 1 package.
- FCL-1125 - Lobster Clasp, 10x6mm, 20 Pieces, Gold Plated
Project uses 1 piece. You will need 1 package.
- XCR-69593 - Beadalon Beading Wire Gold Color 19 Strand .015 Inch / 15 Feet
Project uses 20 Inches. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire (1 Piece)
- XTL-5608 - Xuron 4 In 1 Crimping Pliers - Works On 1, 2 And 3mm Crimps!
- XTL-3000 - Bead Stopper- Stop Beads Sliding Off Stringing Material