Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
- Slide one black wood bead onto a gun metal eye pin and create a simple wire loop using your round nose pliers. Snip off any excess wire using your flush cutters.
- Open a 4mm gunmetal jump ring using your chain nose pliers and slide on the loop from your gunmetal clasp and the top simple wire loop of your bead. Close the jump ring.
- Open a 6mm gunmetal jump ring using your chain nose pliers and slide it through the bottom simple loop of your bead dangle. Before closing, also slide on the top portion of your Green Girl pendant and close. See photo for placement assistance.
- Open another 6mm jump ring and slide it through the bottom hole of your Green Girl pendant and close.
- Watch the video on How to Add a Jump Ring to Premade Tassels.
- Following what you learned in the video, open a 6mm jump ring and carefully slide it through the top portion of your black pre-made tassel. Before closing, also slide it through the previous jump ring and close.
- You're done!
WHAT YOU'LL NEED: (scroll down for purchase options)
- PTS-3502 - Nylon Cord, Tassels 35mm, 6 Pieces, Black
Project uses 1 piece. You will need 1 package.
- PND-9330 - Green Girl Studios Pendant Link, 41.7mm Skeleton, 1 Piece, Pewter
Project uses 1 piece. You will need 1 package.
- FCL-8200 - Gunmetal Grey Color Base Metal Swivel Lobster Clasp 32mm (2)
Project uses 1 piece. You will need 1 package.
- FHP-6270 - Gunmetal Grey Brass Open Eye Pins 21 Gauge 2 Inch (x50)
Project uses 1 piece. You will need 1 package.
- BWD-0425 - Smooth Wood Beads, Round with 10mm Diameter, 36 Pieces, Black
Project uses 1 piece. You will need 1 package.
- FJR-5296 - Gun Metal Plated Open Jump Rings 6mm 19 Gauge (100)
Project uses 3 pieces. You will need 1 package.
- FJR-5294 - Gun Metal Plated Open Jump Rings 4mm 21 Gauge (100)
Project uses 1 piece. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
- XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
- XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose